鄂加強

鄂加強

鄂加強,男,湖南湘潭縣人,1972年生,熱能工程專業博士,控制科學與工程博士後,機械工程博士後,教授/博士生導師(2011年),國家精品課程主講教師。

基本介紹

  • 中文名:鄂加強
  • 外文名:E Jiaqiang
  • 國籍:中國
  • 民族:漢族
  • 出生地:湖南湘潭縣
  • 出生日期:1972年
  • 職業:高校教師
  • 畢業院校:中南大學
  • 主要成就:出版專著和教材8部,發表SCI論文和EI論文200多篇,獲省部級獎5項
人物介紹,學習經歷,工作經歷,研究方向,負責項目,出版專著,專利,發表論文,

人物介紹

鄂加強,男,湖南湘潭縣人,1972年生,熱能工程專業博士,控制科學與工程博士後,機械工程博士後,教授/博士生導師,國家精品課程主講教師,湖南省優秀碩士論文指導教師。2007年榮獲湖南省科技進步二等獎1項,2010年榮獲湖南省教學成果二等獎1項,2011年榮獲湖南省科技進步三等獎1項,2013年榮獲湖南省科技進步三等獎1項,2015年榮獲中國機械工業科技進步三等獎1項。先後為本科生開設熱工測試技術、流體力學、工程熱力學、換熱器原理與設計和能源與動力專業導論等課程,為研究生開設高等工程熱力學、高等燃燒學、熱工過程智慧型控制以及熱動力設備智慧型故障診斷等課程;已指導4名博士研究生、2名博士後、70名碩士研究生,正在指導3名博士後、6名博士研究生和15名碩士研究生。
目前為國家自然科學基金委員會工程科學一處、二處、三處通訊評審專家,高等學校機電類學科委員會能源與動力工程學科教學委員會委員,中國內燃機學會理事,高校工程熱物理學會理事,國際SCI期刊“Journal of Low Frequency Noise, Vibration and Active Control”的副主編,國際SCI期刊“Advances in Mechanical Engineering”和“Journal of Combustion”的客座主編,控制工程期刊編委,教育部科技獎勵評審專家,湖南省自然科學基金委員會評審專家,北京市自然科學基金委員會評審專家,河北省自然科學基金委員會評審專家,廣西區自然科學基金委員會評審專家,浙江省自然科學基金委員會評審專家以及湖南省內燃機學會理事,《Renewable and Sustainable Energy Reviews》、《Applied Energy》、《Energy》、《Energy Conversion and Management》、《Applied Thermal Engineering》、《Fuel》、《International Journal of Hydrogen Energy》、《International Journal of Heat and Mass Transfer》、《Applied Soft Computing》、《Energy & Fuels》、《Powder Technology》或其他國際SCI期刊《International Journal of Thermal Sciences》、《Aerospace Science and Technology》、《Experimental Thermal and Fluid Science》、《Canadian Journal of Chemical Engineering》、《Particuology》、《Korean Journal of Chemical Engineering》和《Environmental Progress & Sustainable Energy》等國內外30多個知名期刊審稿專家。

學習經歷

2013.08-2014.08 新加坡國立大學機械工程系從事學術交流與訪問研究
2012.09-2013.01 中山大學外國語學院國家公派出國留學人員英語高級班培訓
2007.11-2010.07 湖南大學機械工程博士後流動站從事流體機械現代最佳化設計研究
2004.10-2006.12 湖南大學控制科學與工程博士後流動站從事智慧型檢測、控制及智慧型信息融合處理研究
1999.08-2004.09 中南大學熱能工程專業(碩博連讀)從事熱工設備及過程檢測、控制與最佳化研究
1993.09-1997.07 吉林大學(原吉林工業大學)汽車工程學院熱能專業學習

工作經歷

2004.09- 湖南大學機械與運載工程學院從事熱動力設備及工程的智慧型檢測、故障診斷以及排放控制等教學及科研工作;
1997.07-1999.08 湘潭電機集團公司技術中心從事大型礦用自卸車(108t與154t)設計工作

研究方向

能源與動力設備檢測、仿真與最佳化;複雜能源動力設備高效傳熱與節能技術;太陽能、風能和生物質能利用工程及關鍵技術;複雜能源動力設備排放污染控制新技術;新能源動力電池系統熱流協同最佳化;能源動力系統工程、能源安全及能源經濟

負責項目

[1] 國家自然科學基金項目:Pd/石墨烯催化型旋轉式微粒捕集器過濾體分區微波加熱再生與熱-電-化-力學耦合協同最佳化研究,主持,在研;
[2] 武器裝備預研重點基金項目:甚高解析度××減/隔振總體設計方法,主持,已結題;
[3] 國家自然科學基金項目:微粒捕集器過濾體複合再生與多場協同機理及其最佳化研究,主持,已結題;
[4] 湖南省自然科學基金項目:含噪聲銅火法冶煉熱動力學系統混沌與分形識別,主持,已結題;
[5] 湖南省教研教改項目:基於價值鏈驅動的能源與動力工程專業課程體系流程再造、重構與實踐,主持,在研;
[6] 湖南省教研教改項目:大工程觀下熱物理基礎課程教學內容和課程體系改革與實踐,主持,已結題;
[7] 建設機械關鍵技術國家重點實驗室開放基金項目:負壓吸拾作用下環衛洗掃車氣流卷吸顆粒床層的多相流動機理研究,主持,已結題;
[8] 國家留學基金項目:微尺度多孔介質穩定燃燒機理及其套用研究,主持,已結題;
[9] 中央高校基本科研業務費專項資金重點基礎理論項目:工業低品位熱源無機熱超導高效回收基礎研究,主持,已結題;
[10] 湖南大學青年教師成長計畫資助項目:電磁場作用下微尺度多孔介質穩定燃燒機理研究,主持,已結題;
[11] 湖南省工程車輛底盤製造工程技術研究中心開放基金項目:工程車輛混合動力鋰電池組熱流協同設計最佳化研究,主持,在研;
[12] 湖南省工程車輛底盤製造工程技術研究中心開放基金項目:環衛洗掃車負壓吸拾機理辨析,主持,在研;
[13] 湖南省工程車輛底盤製造工程技術研究中心開放基金項目:工程車輛混合動力鋰電池組熱流協同設計最佳化研究,主持,在研;
[14] 長沙市科技局重點項目:車用混合動力鋰電池組熱流設計與控制關鍵技術項目,主持,在研;
[15] 長沙市科技局重點項目:基於多感測器信息融合的中小噸位起重機臂筒智慧型液壓校正裝置研製,主持,已結題;
[16] [可再生能源電力技術湖南省重點實驗室開放基金項目:兆瓦級風電機組風力槳葉多學科設計最佳化理論,主持,已結題;
[17] 校企合作項目:碟式太陽能聚光器動力學特性分析,主持,已結題;
[18] 校企合作項目:兆瓦級風力機高強度螺栓聯接可靠性技術研究,主持,已結題;
[19] 校企合作項目:渦輪增壓器水冷軸承體冷卻水流量辨識模型,主持,已結題;
[20] 高校委託項目:新體制導引頭的抗無源干擾技術研究,主持,已結題;
[21] 廣州市花都區科技計畫項目:機電信息整合的柔性數位化經編機研發,主持,已結題;
[22] 校企合作項目:大功率磁懸浮閥門遠程控制關鍵技術研究,主持,已結題;
[23] 校企合作項目:1.5MW風電偏航減速機技術研究,主持,已結題;
[24] 國家“十一五”科技支撐計畫重點項目:村鎮低品位能源綜合利用關鍵技術研究,參與,已結題;
[25] 國家自然科學基金項目:柴油機微粒捕集器多孔介質過濾體失效辨析及抗失效機理研究,參與(第2),已結題;
[26] 國家自然科學基金面上項目:汽油機沸石分子篩碳氫捕集器冷起動碳氫捕集機理及其熱-流-力學耦合協同最佳化研究[51776062],參與(第2),在研;
[27] 湖南省自然科學基金重點項目:車用微粒捕集器複合再生過程氣粒兩相流動及燃燒數值模擬[06JJ20018],參與(第2),已結題;
[28] 湖南省科技計畫重點項目:車用三效催化轉化器高效長壽低污染關鍵技術與套用,參與(第2),已結題;
[29] 湖南省自然科學基金項目:微粒捕集器微波及鈰-錳基添加劑複合再生過程的全耦合仿真,參與(第2),已結題;
[30] 湖南省自然科學基金:LED大功率路燈多場協同散熱機理研究,參與(第2),已結題.
[31] 湖南省教研教改項目:熱能與動力工程專業以發動機排放污染及控制為特色的創新課程體系的構建與實踐,參與(第2),已結題;

出版專著

[1]鄂加強. 銅精煉過程最佳化建模與智慧型控制[M]. 長沙:湖南大學出版社,2006.
[2]鄂加強. 智慧型故障診斷及其套用[M]. 長沙:湖南大學出版社,2006.
[3]鄂加強,李志鵬,張長宗,滕達著. 新型雙向硬密封大口徑旋球閥現代設計方法與技術[M]. 北京:中國水利水電出版社,2011.
[4]鄂加強,左紅艷,羅周全. 神經網路模糊推理智慧型信息融合及其工程套用[M]. 北京:中國水利水電出版社,2012.
[5]袁文華,鄂加強,龔金科. 柴油機高壓共軌噴油系統設計最佳化及智慧型控制[M]. 北京:中國水利水電出版社,2014.
[6]鄂加強,楊蹈宇,崔洪江,唐文武. 工程熱力學[M]. 北京:中國水利水電出版社,2010.
[7]龔金科,鄂加強,譚理剛,鄧元望. 熱動力設備排放污染及控制(國家“十一五規劃教材”)[M]. 北京:中國電力出版社,2007.
[8]伏軍,龔金科,鄂加強. 柴油機微粒捕集器噴油助燃再生過程熱工模型及其控制[M]. 北京:中國水利水電出版社,2017.

專利

[1] 鄂加強,左威,彭慶國,王曙輝,朱浩,劉騰,鄧元望,龔金科. 一種用於道路清掃車的可變流通面積吸嘴[P]. ZL201510104259.5, 2016.
[2] 蔡皓,霍鵬光,鄂加強,鄧元望. 一種新型類橢圓齒廓轉子機油泵及其轉子和轉子設計方法[P]. ZL201510783644.7, 2015.
[3] 龔金科,王曙輝,鄂加強,餘明果,伏軍,吳鋼,吁璇. 柴油機微粒捕集器主動熱再生方法及其裝置[P]. ZL200810031099.6, 2009.
[4] 龔金科,王曙輝,鄂加強,吳鋼,楊漢乾,郭華. 一種消減柴油機微粒物質排放的方法及其裝置[P]. ZL200710035168.6, 2008.
[5] 龔金科,蔡皓,蔡隆玉,鄂加強,譚理剛,鄧元望. 汽車尾氣三效催化轉化器[P]. ZL200710034581.0, 2009.
[6] 蔡皓,龔金科,餘明果,鄂加強,鄧元望,耿玉鶴. 一種汽車尾氣三效催化轉化器系統及控制方法[P]. ZL201110071155.0,2011.
[7] 王曙輝, 龔金科, 餘明果, 鄂加強, 蔡皓, 左青松. 一種用於太陽能熱發電系統的體積換熱吸熱器[P]. ZL201110259807,2012.
[8] 鄧元望, 韓衛, 龔金科, 鄂加強, 朱浩, 王兵傑, 劉騰. 一種具有碳氫捕集功能的柴油機氧化催化轉化器[P]. ZL 102322320, 2012.
[9] 鄧元望, 劉騰, 鄂加強, 韓衛, 朱浩, 曾誼暉. 一種用於汽油機冷啟動工況的HC排放淨化系統[P]. ZL102322319, 2012.
[10] 鄧元望, 韓衛, 龔金科, 鄂加強, 朱浩, 陳可亮, 劉騰. 一種具有碳氫捕集功能的汽油機尾氣處理裝置[P]. ZL102278182, 2012.

發表論文

發表論文近300篇,其中發表SCI收錄論文70多篇(第1作者或通訊作者發表ESI熱點論文2篇、ESI高被引論文13篇),發表EI收錄論文180多篇,發表ISTP收錄論文20多篇,論文代表作如下:
2018年部分
[1]Jiaqiang E, MinhHieu Pham*, Yuanwang Deng*, Tuannghia Nguyen*, VinhNguyen Duy*, DucHieu Le, Wei Zuo, Qingguo Peng, Zhiqing Zhang. Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends[J]. Energy, 2018, 149: 979-989. SCI 1區 IF: 4.968.
[2]Qingguo Peng, Jiaqiang E*, Jingwei Chen*, Wei Zuo, Xiaohuan Zhao, Zhiqing Zhang. Investigations on effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor[J]. Energy Conversion and Management, 2018, 155: 276-286. SCI 1區 IF: 6.377. ESI Highly Cited Papers
[3]Zhiqing Zhang, Jiaqiang E*, Yuanwang Deng*, Wei Zuo, Qingguo Peng, MinhHieu Pham, Zibin Yin. Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled marine diesel engine[J]. Energy Conversion and Management, 2018, 159: 244-253. SCI 1區 IF: 6.377.
[4]Wei Zuo, Jiaqiang E*, Rongming Lin. Numerical investigations on an improved counterflow double-channel micro combustor fueled with hydrogen for enhancing thermal performance[J]. Energy Conversion and Management, 2018, 159: 163-174. SCI 1區 IF: 6.377.
[5]Wei Zuo, Jiaqiang E*, Rongming Lin, Yu Jin, Dandan Han. Numerical investigations on different configurations of a four-channel meso-scale planar combustor fueled by hydrogen/air mixture[J]. Energy Conversion and Management, 2018, 160: 1-13. SCI 1區 IF: 6.377.
[6]Teng Liu, Jiaqiang E*, W. M. Yang, Yuanwang Deng*, H. An, Zhiqing Zhang, Minhhieu Pham. Investigation on the applicability for adjusting reaction rates of the optimized biodiesel skeletal mechanism[J]. Energy, 2018, 150: 1031-1038. SCI 1區 IF: 4.968.
[7]Wenyu Hu, Jiaqiang E*, Yuanwang Deng*, Lijun Li, Dandan Han, Xiaohuan Zhao, Zhiqing Zhang, Qingguo Peng. Investigation on performance enhancement of a convective wind energy collecting device in the expressway[J]. Energy Conversion and Management, 2018, 171: 249-271. SCI 1區 IF: 6.377.
[8]Jiaqiang E, Zhiqing Zhang*, Jingwei Chen*, MinhHieu Pham, Xiaohuan Zhao, Qingguo Peng, Wei Zuo, Zibin Yin. Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle[J]. Energy Conversion and Management, 2018, 169: 194-205. SCI 1區 IF: 6.377.
[9]Qingguo Peng, Jiaqiang E*, W. M. Yang*, Hongpeng Xu, Jingwei Chen, Tian Meng, Runzhi Qiu. Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air[J]. Energy, 2018, 160: 349-360. SCI 1區 IF: 4.968.
[10]Yuanwang Deng, Huawei Liu, Xiaohuan Zhao*, Jiaqiang E*, Jianmei Chen. Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model[J]. Applied Energy, 2018, 210: 279-287. SCI 1區 IF: 7.900. ESI Highly Cited Papers
[11]Qingguo Peng, Jiaqiang E*, Zhiqing Zhang, Wenyu Hu, Xiaohuan Zhao. Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor[J]. Applied Thermal Engineering, 2018, 130: 541-551. SCI 2區 IF: 3.771.
[12]Jiaqiang E, Yu Jin, Yuanwang Deng, Wei Zuo*, Xiaohuan Zhao, Dandan Han, Qingguo Peng, Zhiqing Zhang. Wetting models and working mechanisms of typical surfaces existed in nature and its application on super-hydrophobic surfaces: A review[J]. Advanced Materials Interfaces, 2018, 5, 1701052. Doi: 10.1002/admi.201701052. SCI 2區 IF: 4.834. Y
[13]Jiaqiang E*, Zhiqing Zhang*, Zhengfang Tu, Wei Zuo, Wenyu Hu, Dandan Han, Yu Jin. Effect analysis on flow and boiling heat transfer performance of cooling water-jacket of bearing in the gasoline engine turbocharger[J]. Applied Thermal Engineering, 2018, 130: 754-766. SCI 2區 IF: 3.771. ESI hot paper, ESI Highly Cited Papers
[14]Jiaqiang E, Dandan Han, An Qiu, Hao Zhu*, Yuanwang Deng*, Jingwei Chen, Xiaohuan Zhao, Wei Zuo, Hongcai Wang, Jianmei Chen, Qingguo Peng. Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system[J]. Applied Thermal Engineering, 2018, 132: 508-520. SCI 2區 IF: 3.771.
[15]Jiaqiang E, Dandan Han, Yuanwang Deng*, Wei Zuo, Cheng Qian, Gang Wu, Qingguo Peng, Zhiqing Zhang. Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation[J]. Applied Thermal Engineering, 2018, 134: 86-94. doi: 10.1016/j.applthermaleng.2018.01.109. SCI 2區 IF: 3.771.
[16]Yuanwang Deng, Changling Feng, Jiaqiang E*, Hao Zhu*, Jingwei Chen, Ming Wen, Huichun Yin. Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review[J]. Applied Thermal Engineering, 2018, 142: 10-29. SCI 2區 IF: 3.771.
[17]Jiaqiang E, Haojie Liu, Xiaohuan Zhao*, Dandan Han*, Qingguo Peng, Wei Zuo, Tian Meng, Runzhi Qiu. Investigation on the combustion performance enhancement of the premixed methane/air in a two-step micro combustor[J]. Applied Thermal Engineering, 2018, 141: 114-125. SCI 2區 IF: 3.771.
[18]Jiaqiang E, Meng Yue, Jingwei Chen*, Hao Zhu*, Yuanwang Deng, Yun Zhu, Feng Zhang, Ming Wen, Bin Zhang, Siyi Kang. Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle[J]. Applied Thermal Engineering, 2018, 144: 231-241. SCI 2區 IF: 3.771.
[19]Guanlin Liu, Jiaqiang E*, Teng Liu, Wei Zuo, Qingling Zhang. Effects of different poses and wind speeds on the flow field of the dish solar concentrator based on virtual wind tunnel experiment with constant wind[J]. Journal of Central south University, 2018, 35(8): 1948-1957. SCI 4區 IF: 0.761.
2017年部分
[1]Jiaqiang E*, Minhhieu Pham*, D. Zhao*, Yuanwang Deng, DucHieu Le, Wei Zuo, Hao Zhu, Teng Liu, Qingguo Peng, Zhiqing Zhang. Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review[J]. Renewable and Sustainable Energy Reviews, 2017, 80: 620-647. SCI 1區 IF: 9.184. ESI Hot Papers, ESI Highly Cited Papers
[2]Wei Zuo, Jiaqiang E*, Dandan Han, Yu Jin. Numerical investigations on thermal performance of double-layer four-channel micro combustors for micro-thermophotovoltaic system[J]. Energy Conversion and Management, 2017, 150: 343-355. SCI 1區 IF: 6.377.
[3]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for micro-thermophotovoltaic system[J]. Energy, 2017, 122: 408-419. SCI 1區 IF: 4.968. ESI Highly Cited Papers
[4]Wei Zuo, Jiaqiang E*, Wenyu Hu, Yu Jin, Dandan Han. Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor[J]. Energy, 2017, 126, 1-12. SCI 1區 IF: 4.968. ESI Highly Cited Papers
[5]Jiaqiang E*, Qingguo Peng*, Yuanwang Deng, Wei Zuo, Haili Liu. Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor[J]. Applied Thermal Engineering, 2017, 110: 665-677. SCI 2區 IF: 3.771. ESI Highly Cited Papers
[6]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness[J]. Applied Thermal Engineering, 2017, 113: 1011-1020. SCI 2區 IF: 3.771. ESI Highly Cited Papers
[7]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Xiaohuan Zhao, Wenyu Hu. Influence of structural and operating factors on performance degradation of the diesel particulate filter based on composite regeneration[J]. Applied Thermal Engineering, 2017, 121: 838-852. SCI 2區 IF: 3.771.
[8]Yuanwang Deng, Wenping Zheng, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Qingsong Zuo, Zhiqing Zhang, Dandan Han. Influence of geometric characteristics of a diesel particulate filter on its behavior in equilibrium state[J]. Applied Thermal Engineering, 2017, 123: 61-73. SCI 2區 IF: 3.771.
[9]Yuanwang Deng, Jinhui Cui, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Zhiqing Zhang, Dandan Han. Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis[J]. Applied Thermal Engineering, 2017, 123: 92-102. SCI 2區 IF: 3.771.
[10]Jiaqiang E*, Cheng Qian, Hao Zhu, Qingguo Peng, Wei Zuo, Guanlin Liu. Parameter-identification investigations on the hysteretic Preisach model improved by the fuzzy least square support vector machine based on adaptive variable chaos immune algorithm[J]. Journal of Low Frequency Noise, Vibration and Active Control, 2017, 36(3): 227–242. SCI 4區 IF: 1.017.
[11]Gang Wu, Shen Li, He Zhao, Xinglin Yang, Jiaqiang E. Experimental and frequency-domain study of acoustic damping of single-layer perforated plates[J]. Aerospace Science and Technology, 2017, 69: 432-438. SCI 2區 IF: 2.228.
2016年及其以前發表論文
[1]Jiaqiang E1,*, Xiaohuan Zhao1,*, Haili Liu, Jianmei Chen, Wei Zuo, Qingguo Peng. Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe[J]. Applied Energy, 2016, 175: 218-228. SCI 1區 IF: 7.182.
[2]Jiaqiang E, Wei Zuo*, Xueling Liu, Qingguo Peng, Yuanwang Deng, Hao Zhu*. Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step[J]. Applied Energy, 2016, 175: 337-345. SCI 1區 IF: 7.182. ESI Highly Cited Paper
[3]Teng Liu1, Jiaqiang E1,*, W. M. Yang1,*, Hui An, Hao Cai. Development of a skeletal mechanism for biodiesel blend surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 162: 278–288. SCI 1區 IF: 7.182. ESI Highly Cited Paper
[4]Jiaqiang E1, Teng Liu1, W. M. Yang*, Yuanwang Deng, Jinke Gong. A skeletal mechanism modeling on soot emission characteristics for biodiesel surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 181: 322-331. SCI 1區 IF: 7.182.
[5]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Wei Zuo, Yu Li, Jun Fu. Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process[J]. Applied Energy, 2016, 181: 14-28. SCI 1區 IF: 7.182.
[6]Wei Zuo, Jiaqiang E*, Haili Liu*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer[J]. Applied Energy, 2016, 184: 77-87. SCI 1區 IF: 7.182.
[7]Jiaqiang E1, Teng Liu1, W. M. Yang*, Jing Li, Jinke Gong, Yuanwang Deng. Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled diesel engine[J]. Energy Conversion and Management, 2016, 117: 410-419. SCI 1區 IF: 5.589. ESI Highly Cited Paper
[8]Jiaqiang E, Qingguo Peng*, Xueling Liu*, Wei Zuo, Xiaohuan Zhao, Haili Liu. Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor[J]. Energy Conversion and Management, 2016, 124: 427-438. SCI 1區 IF: 5.589.
[9]Jiaqiang E, Xiaohuan Zhao*, Yuanwang Deng, Hao Zhu. Pressure distribution and flow characteristics of closed oscillating heat pipe during starting process at different vacuum degrees[J]. Applied Thermal Engineering, 2016, 93: 166-173. SCI 2區 IF: 3.444.
[10]Jiaqiang E*, Wei Zuo, Haojie Liu, Qingguo Peng. Field synergy analysis of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 93: 83-89. SCI 2區 IF: 3.444. ESI Highly Cited Paper
[11]Jiaqiang E*, Wei Zuo, Junxu Gao, Qingguo Peng, Zhiqing Zhang, Pham Minh Hieu. Effect analysis on pressure drop of the continuous regeneration-diesel particulate filter based on NO2 assisted regeneration[J]. Applied Thermal Engineering, 2016, 100: 356-366. SCI 2區 IF: 3.444.
[12]Wei Zuo, Jiaqiang E*, Xueling Liu, Qingguo Peng, Yuanwang Deng*, Hao Zhu. Orthogonal Experimental Design and Fuzzy Grey Relational Analysis for emitter efficiency of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 103: 945-951. SCI 2區 IF: 3.444. ESI Highly Cited Paper
[13]Haili Liu, Jiaqiang E*, Yuanwang Deng*, Changqing Xie, Hao Zhu. Experimental study on pyrolysis characteristics of the tobacco stem based on the microwave heating method[J]. Applied Thermal Engineering, 2016, 106: 473-479. SCI 2區 IF: 3.444.
[14]Haili Liu, Jiaqiang E*, Xiaoqian Ma, Changqing Xie. Influence of microwave drying on the combustion characteristics of food waste[J]. Drying Technology, 2016, 34(12): 1397-1405. SCI 2區 IF: 1.976.
[15]Jiaqiang E*, Ming Liu, Yuanwang Deng, Hao Zhu, Jinke Gong. Influence analysis of monolith structure on regeneration temperature in the process of microwave regeneration in the diesel particulate filter[J]. Canadian Journal of Chemical Engineering, 2016, 94(1): 168-174. SCI 4區 IF: 1.066.
[16]Jiaqiang E, Longfu Xie, Qingsong Zuo, Guiju Zhang. Effect analysis on regeneration speed of continuous regeneration-diesel particulate filter based on NO2-assisted regeneration[J]. Atmospheric Pollution Research, 2016, 7(1): 9-17. SCI 4區 IF: 1.637.
[17]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Chaos Analysis on the Acceleration Control Signals of the Piezoelectric Actuators in the Stewart Platform[J]. Shock and Vibration, 2016, 2016: 1-9. SCI 4區 IF: 1.281.
[18]Qingsong Zuo, Da-ming Zhang, Jiaqiang E*, Jinke Gong. Comprehensive analysis on influencing factors of composite regeneration performance of a diesel particulate filter[J]. Environmental Progress & Sustainable Energy, 2016, 35(3): 882-890. SCI 4區 IF: 1.672.
[19]Bin Zhang, Jinke Gong, Jiaqiang E, Yu Li. Failure recognition of the diesel particulate filter based on catastrophe theory[J]. Canadian Journal of Chemical Engineering, 2016, 94(3): 596-602. SCI 4區. IF: 1.231.
[20]Jiaqiang E*, Haijiao Huang, Xiaohuan Zhao. Numerical investigation on effects of bluff body in flat plate micro thermo photovoltaic combustor with sudden expansion[J]. Journal of Central South University, 2016, 23(4): 975-982. SCI 4區 IF: 0.562.
[21]Jiaqiang E, Qingsong Zuo*, Haili Liu, Yu Li, Jinke Gong. Endpoint forecasting on composite regeneration by coupling cerium-based additive and microwave for diesel particulate filter[J]. Journal of Central South University, 2016, 23(8): 2118−2128. SCI 4區 IF: 0.562.
[22]Tao Chen, Zhixin Wu, Jinke Gong, Jiaqiang E. Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit[J]. Flow, Turbulence and Combustion, 2016, 97(3): 849–864. SCI 3區. IF: 1.863.
[23]Jiaqiang E, Cheng Qian, Haili Liu, Guanlin Liu. Design of the H∞ robust control for the piezoelectric actuator based on chaos optimization algorithm[J]. Aerospace Science and Technology, 2015, 47: 238-246. SCI 2區 IF: 2.057.
[24]Jiaqiang E, Qingsong Zuo, Yuanwang Deng, Hao Cai, Jinke Gong. Intelligent forecasting on composite regeneration endpoint of DPF in the Vehicle[C]. 2015 International Conference on Intelligent Transportation, Big Data & Smart City, Halong Bay, Vietnamese, 2015. (Organizing committee chairman)
[25]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Research on the Vibration Characteristics of the New Type of Passive Super Static Vibratory Platform Based on the Multiobjective Parameter Optimization[J]. Advances in Mechanical Engineering, 2014, 6: 1-8. SCI 4區 IF: 0.640.
[26]Qingsong Zuo, Jiaqiang E*, Jinke Gong, D. M. Zhang, Tao Chen, Guohai Jia. Performance evaluation on field synergy and composite regeneration by coupling cerium-based additive and microwave for a diesel particulate filter[J]. Journal of Central South University, 2014, 21(12): 4599−4606. SCI收錄 IF: 0.520.
[27]Guohai Jia, Jinke Gong, Jiaqiang E, Hao Cai, Shuhui Wang. Effect of Interference Fit on Fretting Wear of Gear Shaft Shoulder[J]. Journal of Central South University, 2014, 21(10): 3746-3752. SCI收錄IF: 0.520.
[28]Hao Cai, Yafei Liu, Jinke Gong, Jiaqiang E. Sulfur Poisoning Mechanism of Three Way Catalytic Converter and its Grey Relational Analysis[J]. Journal of Central South University, 2014, 21(11): 4091- 4096. SCI收錄 IF: 0.520.
[29]Jiaqiang E, Rongjia Zhu, Jianmei Chen, Yan-ping Long, Xiaofeng Hu. Oscillation heat transfer dynamic model for the new type oscillation looped heat pipe with double liquid slugs[J]. Journal of Central South University, 2012, 19(11): 3194-3201. SCI收錄.
[30]Haidong Yang, Jiaqiang E, Ting Qu. Multidisciplinary design optimization for air-condition production system based on multi-agent technique[J]. Journal of Central South University of Technology, 2012, 19(2): 527-536. SCI收錄
[31]Zhigang Zhang, Jiaqiang E, Guixiang Zhang. A novel dense spectrum correction algorithm for extracting vibration signals in internal combustion engine and its application[J]. Journal of Central South University of Technology, 2012, 19(10): 2810-2815. SCI收錄
[32]Hejun WANG, Jiaqiang E, Feiqi DENG. A novel adaptive mutative scale optimization algorithm based on chaos genetic method and its optimization efficiency evaluation[J]. Journal of Central South University of Technology, 2012, 19(9): 2554-2560. SCI收錄
[33]Chunhua Wang, Zhaoping Zhong, Jiaqiang E. Flow regime recognition in spouted bed based on recurrence plot method[J]. Powder Technology, 2012, 219: 20-28. SCI2區,IF: 2.759.
[34]Jiaqiang E, Yuqiang Li, Jinke Gong. Function chain neural network prediction on heat transfer performance of oscillating heat pipe based on grey relational analysis[J]. Journal of Central South University of Technology, 2011, 18(5): 1733-1737. SCI收錄
[35]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Intelligent fitting of minimum spout-fluidised velocity in spout-fluidised bed[J]. Canadian Journal of Chemical Engineering, 2011, 89(1): 101-107. SCI收錄
[36]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Recognition of the flow regimes in the spouted bed based on fuzzy c-means clustering[J]. Powder Technology, 2011, 205(1-3): 201-207. SCI2區,IF: 2.759.
[37]Yihui Zeng, Shaojun Liu, Jiaqiang E. Neuron PI control for semi-active suspension system of tracked vehicle and its application[J]. Journal of Central South University of Technology, 2011, 18(2): 444-450. SCI收錄
[38]Aihua Jiang, Chi Mei, Jiaqiang E, Zhangming Shi. Nonlinear combined forecasting model based on fuzzy adaptive variable weight and its application[J]. Journal of Central South University of Technology, 2010,17(4): 863-867. SCI收錄
[39]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Prediction of jet penetration depth based on least square support vector machine[J]. Powder Technology, 2010, 203(2): 404-411. SCI2區,IF: 2.759.
[40]J. Q. E, Y. N. Wang, C. Mei, J. K. Gong. Chaotic behavior of crude copper composition time series in the process of matte converting and its predicable time scale[J]. Nonlinear Analysis: Real World Applications, 2006, 7(4): 651-661. SCI 1區 IF: 2.519.
[41]Quan Zhang, Ming Zhang, Jiaqiang E. Research on optimum operation and structure of tundish[J]. Journal of Iron and Steel Research International. 2002, (1): 25-27 SCI收錄
[42]Zhangming Shi, Jiaqiang E, Chunyang Liu. Numerical simulation of flow phenomena and optimum operation of tundish[J]. Journal of Central South University of Technology. 2003, 10(2): 155-158. SCI收錄

相關詞條

熱門詞條

聯絡我們