滿成

滿成，男，博士，1989年5月生，中國海洋大學材料科學與工程研究院教師。

基本介紹

• 中文名：滿成
• 學位/學歷：博士
• 職業：教師
• 任職院校：中國海洋大學材料科學與工程研究院

個人經歷

2018.7至今中國海洋大學材料科學與工程學院。

2015.8~2016.8北京科技大學新材料技術研究院研究生輔導員（兼職）。

2013.9~2018.6北京科技大學材料科學與工程學院博士導師：董超芳教授（期間獲得“北京市三好學生”、“北京市普通高等院校優秀畢業生”等榮譽稱號）。

2009.9~2013.6中國海洋大學材料科學與工程研究院學士。

研究方向

1.超高強度不鏽鋼強化機制與腐蝕。

2.金屬材料大氣腐蝕。

3.3D列印不鏽鋼海洋腐蝕。

學術成果

代表論文：

[1]Man C, Dong C, Cui Z, et al. A comparative study of primary and secondary passive films formed on AM355 stainless steel in 0.1 M NaOH. Applied Surface Science, 2018.

[2]Man C, Dong C, Liang J, et al. Characterization of the Passive Film and Corrosion of Martensitic AM355 Stainless Steel. Analytical Letters, 2016.

[3]Man C, Dong C, Cui Z, et al. Characterization of the Outer Layer Nanostructure in the Electrochemical Response of Stainless Steel in Aqueous Sodium Hydroxide. Analytical Letters, 2018.

[4]Man C, Dong C, Xue H, et al. Influence of oxide scales on the corrosion behaviors of B510L hot-rolled steel strips. International Journal of Minerals, Metallurgy, and Materials, 2016.

[5]Man C, Dong C, Fang Y, et al. The Corrosion Behavior of Magnesium Alloy AZ31 in Hot and Dry Atmospheric Environment in Turpan, China. International Journal Of Electrochemical Science, 2015.

[6]Man C, Dong C, Xiao K, et al. The combined effect of chemical and structural factors on pitting corrosion induced by MnS-(Cr, Mn, Al)O duplex inclusions. Corrosion, 2018.

[7]Cui Z, Chen S, Wang L,Man C, et al. Passivation behavior and surface chemistry of 2507 super duplex stainless steel in acidified artificial seawater containing thiosulfate. Journal of Electrochemical Society, 2018.

[8]Cui Z, Li X G,Man C, et al. Corrosion Behavior of Field-Exposed 7A04 Aluminum Alloy in the Xisha Tropical Marine Atmosphere. Journal of Materials Engineering and Performance, 2015.

[9]Yao J, Dong C,Man C, et al. The Electrochemical Behavior and Characteristics of Passive Film on 2205 Duplex Stainless Steel Under Various Hydrogen Charging Conditions. Corrosion, 2015.

[10]D. Kong, X. Ni, C. Dong, X. Lei, L. Zhang,C. Man,et al. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting, Materials & Design, 152 (2018).

[11]D. Kong, X. Ni, C. Dong, L. Zhang,C. Man, et al. Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells, Electrochim. Acta, 276 (2018).

[12]Kong D, Dong C, Xu A,Man C, et al. Effect of Sulfide Concentration on Copper Corrosion in Anoxic Chloride-Containing Solutions. Journal of Materials Engineering and Performance, 2017.

[13]Cui Z, Wang L, Ni H, Hao W,Man C, et al. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates. Corrosion Science, 2017.

[14]Kong D, Dong C, Ni X,Man C, et al. Insight into the mechanism of alloying elements (Sn, Be) effect on copper corrosion during long-term degradation in harsh marine environment. Applied Surface Science, 2018.

[15]Kong D, Dong C, Zheng Z,ManCet al. Surface monitoring for pitting evolution into uniform corrosion on Cu-Ni-Zn ternary alloy in alkaline chloride solution: ex-situ LCM and in-situ SECM. Applied Surface Science, 2018.

[16]Kong D, Dong C, Zhao M,ManCet al. Effect of chloride concentration on passive film properties on copper. Corrosion Engineering, Science and Technology, 2018.

[17]Yi P, Dong C, Xiao K,Man Cet al. In-situ investigation of the semiconductive propective role of Cu2O layer formed on copper in a borate buffer solution. Journal of Electroanalytical Chemistry .

[18]滿成,董超芳,肖葵,余強,等.二氧化硫複合鹽霧環境下2024-T351鋁合金應力腐蝕開裂.工程科學學報, 2017.