基本介紹
- 中文名：景鑫
- 學位/學歷：博士
- 職業：教師
- 任職院校：西北工業大學
個人經歷,學術成果,
個人經歷
工作經歷 Work Experience
2016.12 - 至今 西北工業大學，動力與能源學院，航空推進系
2017.05 - 2017.11 中國航空發動機研究院，仿真技術研究中心
教育經歷 Education Experience
2010.09 - 2016.12 北京航空航天大學，能源與動力工程學院，工學博士，專業：航空宇航推進理論與工程
2006.09 - 2010.07 北京航空航天大學，能源與動力工程學院，工學學士，專業： 飛行器動力工程
學術成果
2019/01-2021/12， 二維/三維機織SiC/SiC複合材料室溫複雜載荷下細觀尺度變形與失效行為研究 ，國家自然基金青年項目（5180021131）
2018/01-2019/04，SiC纖維增強金屬基複合材料整體葉環疲勞壽命分析，橫向課題
2017/01-2018-12，紡織陶瓷基複合材料細觀變形與破壞試驗與仿真研究，中央高校基本業務費 自由探索類項目
論文成果
Xin Jing; Zhen Cheng; Hongwei Niu; Xiaoguang Yang; Duoqi Shi, Deformation and rupture behaviors of SiC/SiC under creep, fatigue and dwell-fatigue load at 1300？°C, Ceramics International, 2019, 45(17 Part A):21440-21447
Jing Xin; Yang Xiaoguang; Shi Duoqi; Niu Hongwei, Tensile creep behavior of three-dimensional four-step braided SiC/SiC composite at elevated temperature , CERAMICS INTERNATIONAL, 2017.6.15, 43(9): 6721~6729
Xin Jing; Duoqi Shi ; Xiaoguang Yang; Chaojun Zhao, Fiber strength measurement for KD-I(f)/SiC composites and correlation to tensile mechanical behavior at room and elevated temperatures , Ceramics International, 2015.1, 4 1(1): 299~307
Shi Duoqi; Jing Xin; Yang Xiaoguang; Low cycle fatigue behavior of a 3D braided KD-I fiber reinforced ceramic matrix composite for coated and uncoated specimens at 1100 degrees C and 1300 degrees C, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 20 15.4.17, 631: 38~44
石多奇; 景鑫; 楊曉光, 三維四向編織CMCs拉伸性能及損傷演化數值預測, 複合 材料學報, 2014.12.15, (06): 1543~1550
程震; 石多奇; 景鑫; 楊曉光, 三維四向編織陶瓷基複合材料改進模型及剛度預 報, 複合材料學報, 2016.3, (06): 1287~1296
石多奇; 牛宏偉; 景鑫; 周新貴; 楊曉光, 考慮孔隙的三維編織陶瓷基複合材料 彈性常數預測方法, 航空動力學報, 2014, (12): 2891~2897
LYU ShuangQi; YANG XiaoGuang; SHI DuoQi ; QI HongYu; JING Xin; LI ShaoLin, Effect of high temperature on compression property and deformation recovery of ceramic fiber reinforced silica aerogel composites , Science China(Technological Sciences), 2017, (11): 1681~1691
Xin Jing; Duoqi Shi; Xiaoguang Yang, Monotonic tension, fatigue and creep behavior of 3D braided KD-I-SiC-fiber-reinforced polymer-derived SiC-matrix composites at 1100oC and 1300oC for coated and uncoated specimens, 2 0th International Conference on Composite Materials, 2015.7.19-2015.7.24
Xin Jing; Duoqi Shi; Xiaoguang Yang,Investigation on fracture surface and failure mechanism for 3D braided KD-I-SiC-fiber-reinforce polymer-derived SiC-matrix composites at 1100oC and 1300oC for coated and uncoated specimens, The 8th Asian-Pacific Conference on Aerospace Technology and Science, 2015.5.20-2015.5.23
