錢立和，男，博士，燕山大學材料科學與工程學院教授。
基本介紹
- 中文名：錢立和
- 出生日期：1963年08月
- 畢業院校：中科院金屬研究所
- 學位/學歷：博士
- 職業：教師
- 專業方向：納米結構高強高韌性鋼
- 任職院校：燕山大學材料科學與工程學院
個人經歷,研究方向,學術成果,
個人經歷
教育經歷
[1]. 1998.9- 2001.6
中國科學院金屬研究所 | 材料學 | 博士研究生 | 博士
[2]. 1986.9- 1989.4
中國科學院金屬研究所 | 材料學 | 碩士研究生 | 碩士
[3]. 1982.9- 1986.7
東北大學 | 物理學 | 大學本科畢業 | 學士
工作經歷
[1]. 2009.9- 至今
燕山大學 | 教授
[2]. 2007.4- 2009.8
九州大學（日本） | 研究員
[3]. 2003.7- 2007.3
豐橋技術科學大學（日本） | 研究員（JSPS fellow）
[4]. 2001.11- 2003.6
東京大學（日本） | 研究員
[5]. 1989.5- 1998.8
馬鞍山鋼鐵公司鋼研所 | 工程師/高級工程師
研究方向
[1].納米結構高強高韌性鋼
[2].亞穩金屬材料
[3].材料的強度與破壞
學術成果
論文成果
[1] S. Liu.錢立和,孟江英,D. Li,P. Ma,張福成.Simultaneously increasing both strength and ductility of Fe-Mn-C twinning-induced plasticity steel via Cr/Mo alloying.SCRIPTA MATERIALIA.2017
[2] Leijie,Zhao.Zhou,Zhang,錢立和,Leijie(1,2),Meng.Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels.Scripta Materialia.2016
[3] 趙雷傑.錢立和,S. Liu.Producing superfine low-carbon bainitic structure through a new combined thermo-mechanical process.JOURNAL OF ALLOYS AND COMPOUNDS.2016
[4] Qian,Zhou.錢立和,Zhao,Zhu,Meng,Zhang.Loading-rate dependence of fracture absorption energy of low-carbon carbide-free bainitic steel.JOURNAL OF ALLOYS AND COMPOUNDS.2015
[5] 周騫.Zhou,Qian,Lihe,Tan,Jun,(2),Meng,Jiangying,Zhang,Fucheng,(1),錢立和.Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity steels.Materials Science and Engineering A.2013
[6] Qian,Zhou.錢立和,Meng,Zhao,Zhang.Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel.Materials and Design.2015
[7] 錢立和.周騫,張福成,張明,田原.Microstructure and mechanical properties of a low carbon carbide-free bainitic steel co-alloyed with Al and Si.Materials and Design.2012
[8] Shuai,Liu.Zhang,錢立和,Meng,Ma.On the more persistently-enhanced strain hardening in carbon-increased Fe-Mn-C twinning-induced plasticity steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2015
[9] Penhui,Ma.Zhang,錢立和,Meng,Liu.Influence of Al on the fatigue crack growth behavior of Fe-22Mn-(3Al)-0.6C TWIP steels.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2015
[10] 孟江英.Zhang,錢立和,Feng,Zhou,Zhao.Effects of Austempering Temperature on Strength, Ductility and Toughness of Low-C High-Al/Si Carbide-Free Bainitic Steel.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE.2015
[11] Pengcheng,Guo.Qian,Lihe,Meng,Jiangying,Zhang,Fucheng,錢立和.MONOTONIC TENSION AND TENSION-COMPRESSION CYCLIC DEFORMATION BEHAVIORS|OF HIGH MANGANESE AUSTENITIC TWIP STEEL.ACTA METALLURGICA SINICA.2014
[12] 錢立和.X. Cui,S. Liu.Image-based numerical simulation of the local cyclic deformation behavior around cast pore in steel.Materials Science and Engineering A.2016
[13] 馬鵬輝.錢立和,張漢林,劉帥,張福成.服役加工硬化後高錳鋼轍叉心軌應力/應變場分析.鐵道學報.2015
[14] 錢立和.Qian,Lihe,Guo,Pengcheng,Meng,Jiangying,Zhang,Fucheng,(1).Unusual grain-size and strain-rate effects on the serrated flow in FeMnC twin-induced plasticity steels.Journal of Materials Science.2013
[15] 馬鵬輝.錢立和.Fatigue crack growth behavior of a coarse- and a fine-grained high|manganese austenitic twin-induced plasticity steel.Materials Sciences and Engineering A.2014
[16] 郭鵬程.錢立和.高錳奧氏體TWIP鋼的單向拉伸與拉壓循環變形行為.金屬學報.2014
[17] 錢立和.Qian,Lihe,Guo,Pengcheng,Fucheng,Zhang,Ming.Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe-Mn-C twin-induced plasticity steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[18] 郭鵬程.Guo,Pengcheng,Qian,Lihe,Meng,Jiangying,Zhang,Fucheng,Li,Laifeng,錢立和.Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING.2013
[19] 張艷.張福成,錢立和,王天生.Atomic-scale simulation of α/γ iron phase boundary affecting crack propagation using molecular dynamics method.Computational Materials Science.2011
[20] 郭鵬程.錢立和.Fatigue deformation behavior of Fe-Mn-C-(Al) TWIP steels.Materials Science Forum.2016
[21] Shuai,Liu.錢立和.Unusual grain refinement effect on the tensile properties and twinning behavior of high-carbon Fe-Mn-C TWIP steel.Proceedings of The 1st International Conference on Automobile Steel & The 3rd International Conference on High Manganese Steels.2016
[22] 錢立和.Liu,Shuai.Cyclic deformation and fatigue crack growth behavior in Fe-Mn-C-(Al) TWIP steels.Proceedings of The 1st International Conference on Automobile Steel & The 3rd International Conference on High Manganese Steel.2016
[23] 馬鵬輝.錢立和,張漢林,劉帥,張福成.服役加工硬化後高錳鋼轍叉心軌應力/應變場分析.鐵道學報.2015
[24] 孟江英.Minan,Chen,Shuai,Liu,Fucheng,Zhang,錢立和.3D Investigation of Fatigue Crack Morphology and Crack Growth of Iron-based Materials via Synchrotron X-ray CT.Materiasl Science Forum.2015
[25] 錢立和.Local Cyclic Deformation Behavior in Pore-containing Cast High Manganese Steel Investigated via Synchrotron X-ray CT Image Based Simulation.ATEM’15, JSME-MMD.2015
[26] Zhou,Qian.錢立和.Loading Rate Sensitivity of Fracture Absorption Energy of Bainitic-Austenitic TRIP Steel.Materials Science Forum.2015
[27] Ma,Penghui.錢立和.Fatigue Crack Growth Behavior of High Manganese Austenitic TWIP Steels.Materials Science Forum.2015
[28] 趙雷傑.錢立和.Ausforming followed by below-Ms austempering of low-carbon Si-rich bainitic steel.Proceedings of The 1st International Conference on Automobile Steel & The 3rd International Conference on High Manganese Steels.2016
[29] 錢立和.3D crack evolution and crack-tip field of cast steel investigated by synchrotron X-ray CT and image-based simulation.The 9th Inter. Forum on Adv. Mater. Sci. Tech.2014
[30] 肖俊華.張福成,錢立和.Contact stress and residual stress in the nose rail of a high manganese steel crossing due to wheel contact loading.FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES.2014
[31] 肖俊華.張福成,錢立和.高錳鋼轍叉振動特性的數值研究.套用力學學報.2013
[32] 錢立和.劉帥,郭鵬程,張福成.轍叉用高錳鋼的循環變形與硬化.燕山大學學報.2012
[33] 錢立和.張福成.Characteristics of Dynamic Strain Ageing in a Twin-induced Plasticity Steel.The 8th Inter. Forum on Advanced Mater.2012
[34] 肖俊華.張福成,錢立和.Finite element analysis on contact of wheel and high Manganese steel crossing.Advanced Materials Research.2011
[35] 肖俊華.張福成,錢立和.Numerical simulation of stress and deformation in a railway crossing.Engineering Failure Analysis.2011
專利
[1]一種低碳高硬度納米貝氏體鋼及其製備方法
科研項目
[1]超細晶低合金TRIP鋼的製備、組織及增強增塑研究, 2019/10/18, 進行
[2]2018國家重點實驗室自主研究經費支持項目（科技廳配套）—自由探索21, 2018/09/06, 進行
[3]2018國家重點實驗室自主研究經費支持項目—自由探索21, 2018/09/06, 進行
[4]換熱器用合金材料靜態力學及動態疲勞性能測試分析, 2018/07/01-2018/07/01, 進行
[5]工程材料混合式網路教學互動平台的建設研究, 2016/07/28, 進行
[6]用同步輻射X射線CT技術研究高錳奧氏體TWIP鋼疲勞裂紋三維擴展的機理, 2011/08/06-2016/03/21, 完成
[7]高錳鋼的疲勞破壞行為及其三維可視化研究, 2011/01/01-2015/04/24, 完成
[9]2017國家重點實驗室自主研究經費支持項目（科技廳配套）-團隊重點7, 2017/09/01, 進行
[10]2017國家重點實驗室自主研究經費支持項目-團隊重點7, 2017/09/01, 進行
[11]2016國家重點實驗室自主研究經費支持項目（科技廳配套）-自由探索13, 2016/01/01, 進行
[12]2016國家重點實驗室自主研究經費支持項目-自由探索13, 2016/01/01, 進行
[13]2015年度國家重點實驗室基礎研究項目20, 2015/06/09, 進行
[14]無碳化物貝氏體鋼的疲勞斷裂行為與機制研究, 2015/03/27-2018/06/21, 完成
[15]無碳化物貝氏體鋼中殘餘奧氏體的循環載入力學穩定性及疲勞性能研究, 2014/06/25-2018/01/18, 完成
[16]鐵路轍叉用高錳鋼變形與破壞的三維可視化研究, 2010/06/28-2013/06/30, 完成
[17]新型高鉻鑄鐵襯板研究, 2010/05/05-2011/05/05, 進行
[18]大功率風電機組用軸承鋼關鍵技術開發3, 2012/01/01-2016/12/31, 完成
