趙士騰

趙士騰

趙士騰，2010年本科畢業於北京科技大學材料科學與工程專業，2013年獲得德國亞琛工業大學冶金工程專業碩士，2017年獲得加州大學聖地亞哥分校材料科學博士，北京航空航天大學材料科學與工程學院教授。

基本介紹

  • 中文名：趙士騰
  • 國籍：中國
  • 畢業院校：北京科技大學、德國亞琛工業大學、加州大學聖地亞哥分校 
  • 學位：博士 
  • 教學職稱：教授 
基本情況,研究方向,代表性論文,

基本情況

趙士騰，教授，博士生導師，2010年本科畢業於北京科技大學材料科學與工程專業，2013年獲得德國亞琛工業大學冶金工程專業碩士，2017年獲得加州大學聖地亞哥分校材料科學博士，2018-2021年於加州大學伯克利分校和勞倫斯伯克利國家實驗室-國家電鏡中心從事博士後研究，2021年5月入職北航材料科學與工程學院。發表文章38篇，其中以第一作者（含共一）/通訊作者身份發表代表性論文13篇，包括 Nature （1篇），Science (1篇) ，Nature Materials（1篇），PNAS (2篇)， Science Advances（2篇），Materials Today （1篇），Acta Materialia（4篇），曾獲國家優秀自費留學生獎學金，Acta Materialia論文獎，Gareth Thomas傑出青年材料學家獎。2020年入選國家級青年人才計畫。

研究方向

  1. 先進結構材料在極端（高壓、高溫、高應變速率）條件下的力學行為
  2. 先進金屬材料的合金設計、強韌化機理研究及多尺度微觀組織調控
  3. 透射電子顯微學

代表性論文

  1. S. Zhao, C. Meng, F. Mao, W. Hu, G. Gottstein: Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys. Acta Materialia 2014; 76:54-67.
  2. S. Zhao, B. Kad , E. N. Hahn, B.A. Remington, C.E. Wehrenberg, C.M. Huntington, H.-S. Park, E. M. Bringa, K.L. More, M.A. Meyers, Pressure and Shear Induced Amorphization of Silicon, Extreme Mechanics Letters 2015 5: 74-80.
  3. S. Zhao, E. N. Hahn, B. Kad, B. A. Remington, C.E. Wehrenberg, E. M. Bringa, M. A. Meyers, Amorphization and Nanocrystallization of silicon under shock compression, Acta Materialia 2016 103:519-533.
  4. S. Zhao, E.N. Hahn, B. Kad, B.A. Remington, E.M. Bringa, M.A. Meyers, Shock compression of [001] silicon single crystal, European Physical Journal: Special Topics 2016; 225, 335-341.
  5. S. Zhao, B. Kad, B. A. Remington, C.E. Wehrenberg, J. Lasalvia, K. Beuler, M.A. Meyers, Directional amorphization of boron carbide subjected to laser shock compression. Proc. Nat. Acad. Sci. U.S.A. 2016; 113;12088-12093.
  6. S. Zhao, B. Kad, C.E. Wehrenberg, B.A. Remington, E.N. Hahn, K.L. More, M.A. Meyers, Generating Gradient Germanium Nanostructures by Shock-induced Amorphization and Crystallization. Proc. Nat. Acad. Sci. U.S.A. 2017, 114, 9791-9796.
  7. S. Zhao, R. Flanagan, E.N. Hahn, B. Kad, B.A. Remington, C.E. Wehrenberg, R. Cauble, K. More, M.A. Meyers, Shock-induced amorphization in silicon carbide. Acta Materialia, 2018, 158, 206-213.
  8. T.P. Remington, E.N. Hahn, S. Zhao, R. Flanagan, J.C.E. Mertens, S. Sabbaghianrad, T.G. Langdon, C.E. Wehrenberg, B.R. Maddox, D.C.Swift, B.A. Remington, N. Chawla, M.A. Meyers*, Spall strength dependence on grain size and strain rate in tantalum, Acta Materialia, 2018, 158, 313-329.
  9. Z. Li, S. Zhao, R.O. Ritchie, M.A. Meyers, Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys, Progress in Materials Science, 2018, 102, 296-345.
  10. S. Zhao, R. Zhang, T. Pekin, A. Minor, Probing Crystalline Defects Using an EBSD-based Virtual Dark-Field Method, Microscopy and Microanalysis, 2019, 25, 1992-1993.
  11. R. Zhang, S. Zhao, C. Ophus, T. Pckin, Y. Deng, S.J. Vachhani, B. Ozdol, R. Traylor, K. Bustillo, M. Poschmann, J.W. Morris Jr, D.C. Chrzan, M. Asta, A. M. Minor, Direct imaging of short-range order and its impact on deformation in Ti-6Al, Science Advances, 2019, 5, eaax2799.
  12. R. Zhang, S. Zhao, J. Ding, C. Ophus, M. Asta, R. Ritchie, A.M. Minor, Short-range order and its impact on the CrCoNi medium-entropy alloy, Nature, 2020, 581, 283-287.
  13. B. Savitzky, S. Zeltmann, L. Hughes, H. Brown, S. Zhao, P.Pelz, T. Pekin, E. Barnard, J. Donohue, L. DaCosta, E.Kennedy, Y. Xie, M.Janish, M.Schneider, P.Herring, C. Gopal, A.Anapolsky, R. Dhall, K. Bustillo, P.Ercius, M.Scott, J.Ciston, A.Minor, C.Ophus, py4DSTEM: a Software Package for Four-Dimensional Scanning Transmission Electron Microscopy Data Analysis, Microscopy and Microanalysis, 2021, 1-32.
  14. D. Giuntini, S. Zhao, T. Krekeler, M. Li, M. Blankenburg, B.Bor, G. Schaan, B. Domenech, M. Mueller, I. Scheider, M. Ritter, G. Schneider, Defects and plasticity in ultrastrong supercrystalline nanocomposites, Science Advances, 2021, 7(2), eabb6063.
  15. F. Cao, Y. Chen, S. Zhao, E. Ma, L. Dai, Grain boundary phase transformation in a CrCoNi complex concentrated alloy, Acta Materialia, 2021, 209, 116786.
  16. S. Zhao, R. Zhang, Y. Chong, X. Li, A, Abu-Odeh, E. Rothchild, D. Chrzan, M. Asta, J.W. Morris Jr, A. Minor, Defects reconfiguration in a Ti-Al alloy via electroplasticity, Nature Materials, 2021, 20 (4), 468-472.
  17. S. Zhao, Z. Li, C. Zhu, W. Yang, Z. Zhang, D. Armstrong, P. Grant, R. Ritchie, M. Meyers, Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy, Science Advance, 2021, 7(2), eabb6063.
  18. S. Zhao, R. Zhang, Q.Yu, J. Ell, R. Ritchie, A.Minor, Cryoforged nanotwinned titanium with ultrahigh strength and ductility, Science, 2021,373(6561),1363-1368.
  19. S. Zhao, B. Li, B. Remington, C. Wehrenberg, H. Park, E. Hahn, M. A. Meyers, Directional amorphization of covalently bonded solids: a generalized deformation mechanism in extreme loading, Materials Today, 2021,49,59-67.
  20. B. Li, AC Li, S. Zhao*, M.A. Meyers, Amorphization by mechanical deformation, Materials Science and Engineering: R: Reports，2022，149, 100673.

相關詞條

熱門詞條

聯絡我們