沈將華

沈將華

沈將華，男，1985年生，浙江杭州人，西北工業大學航空學院教授、博士生導師，國家級青年人才。2004年獲浙江大學學士學位，2015年獲得美國北卡羅來納大學夏洛特分校機械工程博士學位，2016年獲得西北工業大學固體力學博士學位。2015.07-2017.12任日本大阪大學接合科學研究所博士後研究員，2017.12-2018.02任特任副教授，2018年任西北工業大學副教授，2019年晉升教授。主要研究方向為衝擊動力學、金屬微觀力學及生物力學，主持國家自然科學基金青年項目等5項科研課題，參與陝西省重點研發計畫項目。發表SCI論文50餘篇，其中第一作者/通訊作者論文28篇，研究成果發表於《Materials Science and Engineering: A》等期刊。獲中國力學學會爆炸力學優秀青年學者獎、陝西省航空學會青年科技獎。現任陝西省衝擊動力學及工程套用重點實驗室副主任，擔任《Journal of Magnesium Alloys》等期刊青年編委。

基本介紹

  • 中文名：沈將華
  • 學位/學歷：博士
  • 職業：教師
  • 專業方向：輕金屬（鎂、鋁、鈦）材料或結構在極端條件下的力學回響
  • 任職院校：西北工業大學航空學院
人物經歷,教育背景,研究方向,學術成果,

人物經歷

工作經歷
2019.07 -——西北工業大學航空學院 教授
2018.02 - 2019.07 西北工業大學航空學院 副教授
2017.12 - 2018.02 [日本]大阪大學接合科學研究所 Specially-appointed associate professor
2015.07 - 2017.12 [日本]大阪大學接合科學研究所 Specially-appointed researcher

教育背景

2012.08 - 2015.05 [美國]北卡羅來納大學夏洛特分校 博士
2008.09 - 2016.08 西北工業大學 博士
2004.09 - 2008.06 浙江大學 學士

研究方向

1. 輕金屬（鎂、鋁、鈦）材料或結構在極端條件下的力學回響、應變率效應和失效機制；
2. 金屬材料的塑性加工、微觀組織與力學性能表征及其在微納尺度下的力學行為機制；
3.臨床醫學材料的微觀結構設計、力學回響及其臨床適應性研究。

學術成果

科研項目
1. 不同應變率下高氧含量鈦的力學行為及失效機制研究，國家自然科學基金青年項目，主持，2019.01 - 2021.12；
2.高性能Ti-O二元鈦合金的微觀組織和力學行為，中央高校基本科研任務經費，主持，2018.01 - 2020.12；
3.受衝擊載荷下器官及細胞的損傷機制以及治療和免疫恢復機理研究，陝西省重點研發計畫，參研，2019.06 - 2022.05；
論文
  1. Haoze Li,Jianghua Shen, Qiuming Wei, Xiaodong Li,Dynamic self-strengthening of a bio-nanostructured armor-conch shell, Materials Science and Engineering: C 103, 109820, 2019
  2. J Shen*, B Chen, J Umeda, J Zhang, Y Li, K Kondoh,Rate sensitivity and work-hardening behavior of an advanced Ti-Al-N alloy under uniaxial tensile loading, Materials Science and Engineering: A 744, 630-637, 2019
  3. J Shen*, B Chen, J Umeda, K Kondoh ,Advanced Mechanical Properties of a Powder Metallurgy Ti-Al-N Alloy Doped with Ultrahigh Nitrogen Concentration, JOM 70 (5), 626-631, 2018
  4. B Chen, SK Moon, X Yao, G Bi,J Shen, J Umeda, K Kondoh,Comparison Study on Additive Manufacturing (AM) and Powder Metallurgy (PM) AlSi10Mg Alloys, JOM 70 (5), 644-649, 2018
  5. J Shen*, B Chen, J Umeda, K Kondoh,Microstructure and mechanical properties of CP-Ti fabricated via powder metallurgy with non-uniformly dispersed impurity solutes, Materials Science and Engineering: A 716, 1-10, 2018
  6. B Chen, SK Moon, X Yao, G Bi,J Shen, J Umeda, K Kondoh, Strength and strain hardening of a selective laser melted AlSi10Mg alloy, Scripta Materialia 141, 45-49, 2017
  7. B Chen,J Shen*, X Ye, L Jia, S Li, J Umeda, M Takahashi, K Kondoh,Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites, Acta Materialia 140, 317-325, 2017
  8. B Chen+,J Shen*, +, X Ye, J Umeda, K Kondoh,Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentration, Journal of Materials Research 32 (19), 3769-3776, 2017
  9. XX Ye, B Chen,JH Shen, J Umeda, K Kondoh,Microstructure and strengthening mechanism of ultrastrong and ductile Ti-xSn alloy processed by powder metallurgy, Journal of Alloys and Compounds 709, 381-393, 2017
  10. J Shen, X Chen, V Hammond, LJ Kecskes, SN Mathaudhu, K Kondoh, Q Wei,The effect of rolling on the microstructure and compression behavior of AA5083 subjected to large-scale ECAE, Journal of Alloys and Compounds 695, 3589-3597, 2017
  11. J Shen*, B Chen, X Ye, H Imai, J Umeda, K Kondoh,The formation of bimodal multilayered grain structure and its effect on the mechanical properties of powder metallurgy pure titanium, Materials & Design 116, 99-108, 2017
  12. XX Ye, H Imai,JH Shen, B Chen, GQ Han, J Umeda, M Takahashi, K Kondoh,Strengthening-toughening mechanism study of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests, Journal of Alloys and Compounds 694, 82-92, 2017
  13. XX Ye, H Imai,JH Shen, B Chen, GQ Han, J Umeda, M Takahashi, K Kondoh,Dynamic recrystallization behavior and strengthening-toughening effects in a near-α Ti-xSi alloy processed by hot extrusion, Materials Science and Engineering: A 684, 165-177, 2017
  14. XX Ye, H Imai,JH Shen, B Chen, GQ Han, J Umeda, K Kondoh,Study of twinning behavior of powder metallurgy Ti-Si alloy by interrupted in-situ tensile tests, Materials Science and Engineering: A 679, 543-553, 2017
  15. B Chen,J Shen, X Ye, H Imai, J Umeda, M Takahashi, K Kondoh,Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites, Carbon 114, 198-208, 2017
  16. J Shen*, H Imai, B Chen, X Ye, J Umeda, K Kondoh,Highly Thermally Stable Microstructure in Mg Fabricated Via Powder Rolling, JOM, 29(4), 657-662, 2017
  17. J Shen*, H Imai, B Chen, X Ye, J Umeda, K Kondoh,Deformation mechanisms of pure Mg materials fabricated by using pre-rolled powders, Materials Science and Engineering: A 658, 309-320, 2016
  18. Nathan Behm, Hanry Yang,Jianghua Shen, Kaka Ma, Laszlo J Kecskes, Enrique J Lavernia, Julie M Schoenung, Qiuming Wei,Quasi-static and high-rate mechanical behavior of aluminum-based MMC reinforced with boron carbide of various length scales, Materials Science and Engineering: A 650, 305-316, 2016
  19. GQ Han,JH Shen, XX Ye, B Chen, H Imai, K Kondoh, WB Du,The influence of CNTs on the microstructure and ductility of CNT/Mg composites, Materials Letters 181, 300-304, 2016
  20. Jianghua Shen*, Viera G？rtnerová, Laszlo J. Kecskes, Katsuyoshi Kondoh, Ale？ J？ger, Qiuming Wei,Residual stress and its effect on the mechanical properties of Y-doped Mg alloy fabricated via back-pressure assisted equal channel angular pressing (ECAP-BP), Materials Science and Engineering: A 669, 110-117, 2016
  21. J Shen, K Kondoh, TL Jones, SN Mathaudhu, LJ Kecskes, Q Wei,Effect of strain rate on the mechanical properties of magnesium alloy AMX602, Materials Science and Engineering: A 649, 338-348, 2016
  22. J Shen, W Yin, K Kondoh, TL Jones, LJ Kecskes, SN Yarmolenko, Q Wei,Mechanical behavior of a lanthanum-doped magnesium alloy at different strain rates, Materials Science and Engineering: A 626, 108-121, 2014
  23. JH Shen, YL Li, Q Wei,Statistic derivation of Taylor factors for polycrystalline metals with application to pure magnesium, Materials Science and Engineering: A 582, 270-275, 2013
  24. J Shen+, W Yin, Q Wei, Y Li, J Liu+, L An,Effect of ceramic nanoparticle reinforcements on the quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites, Journal of Materials Research 28 (13), 1835-1852, 2013

相關詞條

熱門詞條

聯絡我們