《Advances in Mechanisms, Robotics and Design Education and Research》是Springer出版的圖書，作者是Kumar, Vijay; Schmiedeler, James; Sreenivasan, S. V.
基本介紹
- ISBN：9783319003979
- 作者：Kumar, Vijay; Schmiedeler, James; Sreenivasan, S. V.
- 出版社：Springer
- 頁數：426
Advances in Mechanisms, Robotics and Design Education and Research
相關詞條
- 機器人學(第二版)
1.1.2Advances in Robotics 1.2Definition and Characteristics of Robots 1.2.1Definition of Robots 1.2.2Main Characteristics of Robots 1.3Structure and Classification of Robots 1.3.1Structure of a Robot System 1.3.2Degrees of Freedom of Robots 1.3.3Classification of Robots 1.4Research ...
- 謝福貴(清華大學機械工程系副研究員)
Xie Fugui*, Liu Xin-Jun. Design and development of a High-Speed and High-Rotation robot with four identical arms and a single platform. Journal of Mechanisms and Robotics-Transactions of the ASME, 2015,Xie Fugui*, Liu Xin-Jun, Wu Chao and Zhang Pan. A novel spray painting robotic device...
- 孫衛東(清華大學電子工程系遙感研究室教授)
X.G.Meng，A.W.Zhang，S.X.Hu，W.D.Sun，J.L.Yang：“A Method to Align POS Data and Linear Push-broom Imaging Data”，Advances in Automation and Robotics，Vol.2，pp.99~106，Spring，2011.12.H.J.Huang，W.D.Sun：“High Accurate Pattern-based Sub-pixel Registration and Its Application ...
- 胡偉飛(浙江大學機械工程學院設計工程研究所研究員)
4. P.A. Kulkarni*,W. Hu, A.S. Dhoble, and P.M. Padole, 2017, “Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads,”Advances in Mechanical Engineering, Vol. 9, No. 9, pp. 1-26, DOI: 10.1177/1687814017724088....
- 楊桂林(中國科學院寧波材料技術與工程研究所原副所長、2014光華龍騰獎...
編委（Editorial Board Member）, International Journal of Mechanisms and Robotic Systems；分卷主編（Section Editor）, Robotics and Automation Volume, Handbook of Manufacturing Engineering and Technology, Springer, 2014;IEEE機器人與自動化學會新加坡分會主席 （2011-2012）；IFToMM機器人與機械電子技術委員會理事...
- 楊帆(清華大學自動化系副教授/副研究員)
中國航天科技集團有限公司第五研究院總體部科技委專業技術委員會委員 美國化學工程師學會（AIChE）高級會員 《Advances in Robotics & Automation》編委 《自動化學報》、《控制理論與套用》、《中國化學工程學報》、《Automatica》、《IEEE Transactions on Control Systems Technology》、《Journal of Process Control》、...
- 程龍(中國科學院自動化研究所研究員)
2010-03--2010-09University of Saskatchewan (Canada, Saskatoon) Postdoctoral Research Associate 2009-07--2011-09中國科學院自動化研究所助理研究員 2014-03—今Advances in Mechanical Engineering(SCI 2區，編委)2014-02—今IEEE Transactions on Neural Networks and Learning Systems (SCI 1區，特刊編輯)2013-...
- 管貽生
South Africa – German International Research Foundation, 2010 PhD Dissertation Examination for UniversityofTechnology,Sydney, Australia, 2011 擔任國際學術期刊《Advances in Robotics Research》的編委 擔任IEEE RAS China Chapter (IEEE機器人與自動化學會中國專業委員會，籌組中)執行委員 研究領域 仿生機器人（包括...
- 丁華鋒(第十四屆全國政協委員,中國地質大學(武漢)機械與電子信息學院...
丁華鋒，男，漢族，1977年6月生，湖北荊門人，研究生學歷，先後獲得燕山大學和德國杜伊斯堡-埃森大學雙博士學位，博士研究生導師，教授。2017年10月加入民革，德國“洪堡學者”。現任中國地質大學（武漢）機械與電子信息學院院長，第十四屆全國政協委員，民革湖北省第十三屆委員會副主委。人物經歷 教育經歷 1996年－2000...
- icam(先進材料國際學術會議)
New Mechanisms and Robotics Driven Train Mechanisms Complex Electro-mechanical System Design Advanced CAE Technique 會議新聞 ICAM進入維普資訊會議列表 ICAM進入科學網會議列表 ICAM進入中國學術會議線上 ICAM進入中國知網會議列表 重要日期 截稿日期：2014年8月25日 會議日期：2014年12月13日–14日 會議費用 Condition...
- 劉婧芳
劉婧芳，女，機械設計及理論學科部，講師。2005年7月畢業於燕山大學機械設計製造及其自動化專業，獲工學學士學位；2010年10月畢業於燕山大學機械電子工程專業，獲博士學位。教育教學情況 主講本科生《機械設計I》、《機械設計課程設計》等課程。科學研究 科研方向：機器人學及機構學，包括並/混在線上器人理論與控制研究...
- 馮辛安
13.“Gene-engineering-based innovation and reverse deduction of virtual chromosomes of manufacturing products”, Advances in Design, Springer, London, 2006, pp.133-144.14.“Visualized CAD models of objects made of a multiphase perfect material”, Advances in Engineering Software, 2006; 37(1): 20...
- 姚美寶
[5].Meibao Yao, Xueming Xiao, Christoph H.Belke, Hutao Cui, Jamie Paik. Optimal distribution of active modules in reconfiguration planning of modular robots[J]. Journal of Mechanisms and Robotics, 2019, 11(1): 011017. (IF= 2.233，JCR：Q2，中科院：Q3)[6].Meibao Yao, Xueming Xiao, Yang...
- 李君蘭(天津大學機械工程學院副教授)
IEEE學會會員，國際仿生工程學會會員，擔任多個國際學術期刊審稿人： Applied Thermal Engineering、Aerospace Science and Technology、Advances in Space Research、 Journal of Aerospace Engineering、International Journal of Mechanical Science、Advances in Mechanical Engineering 等。期刊論文 [1] Junlan Li*, Hongzhou ...
- 于洋(西安科技大學機械工程學院教師)
[3] Yu Yang，Chi Ming. The design on intelligent logging unblocking device. Advances in Automation and Robotics，2011.12，[4] Yu Yang ,He Ming-Ye,Hao Ying-Ji .Monitoring system design of suspension bridge of health status based on CAN-BUS. Informatice in Control ,Automation and Roboics....
- 楊玲(成都信息工程大學教授)
6.FusingICPVRandILMIPinVolumeRendering，2ndInternationalConferenceofElectricalandElectronicsEngineering，2011，EI(20120414714554)，第一作者 7.StudyofCloud-TypeRecognitionBasedonMulti-classFeatures，AdvancesinAutomationandRobotics,Vol.1，2011，EI(20114814560652)，第一作者 8.Recognitionofstratiform/cumuliformcloudbase...
- 陳子明(燕山大學機械工程學院教授)
[10] Ziming Chen, Yang Zhang, Kun Huang, Zhen Huang. Constraint and Mobility Analysis of the SNU 3-UPU Parallel Mechanism in Mixed Mode, Advances in Reconfigurable Mechanisms and Robots II, Xilun Ding, Xianwen Kong, Jian S. Dai (Editors), vol. 36, Springer International Publishing, 2016: ...
- 溫求遒
10. 溫求遒、程子原、孫婧、夏群利，組合導航桿臂效應寄生迴路研究，彈道學報，第23 卷，第4 期，2011 11. WEN Qiuqiu、XIA Qun-li、Cai Chun-tao，Analysis for height control-loop of cruise missile to different kinds of autopilot，Advances in automation and robotics，Vol.2，2011 12. 溫求遒、夏群利、...
- 邵珠峰(清華大學機械工程系副教授)
[7] Shao ZF, Tang XQ, Yi WM. Optimal Design of a 3-DOF Cable-Driven Upper Arm Exoskeleton[J]. Advances in Mechanical Engineering, 2015, 6(1):157096-157096 [8] Tang XQ, Shao ZF. Trajectory Planning and Tracking Control of a Multi-level Hybrid Support Manipulator in FAST[J], ...
- 布萊恩·威亞德
“Information Goods Upgrades: Theory and Evidence” – The B.E. Journal of Theoretical Economics, Vol. 7, Issue 1 (Contributions), Article 3, 2007.“Recent Advances in Structural Econometric Modeling: Dynamics, Product Positioning and Entry,” (with Jean-Pierre Dube, K. Sudhir, Andrew Chiang,...
- 黃波(南京理工大學教授、博導)
o [j30] Bo Huang, RongXi Jiang, GongXuan Zhang. Heuristic search for scheduling flexible manufacturing systems using multiple heuristic functions. Modern Advances in Applied Intelligence. Springer International Publishing, June 2014: 178-187.o [j29] PeiYun Zhang, EnHong Chen, RongJian Xie, Xiu...
- 徐永生(中科院“百人計畫”引進國外傑出人才)
7. Zhang, X.,andY. Xu*(2015), Design and Implementation of Adaptive Noise Canceler Based on RLS Algorithm,Recent Advances in Mathematical and Computational Methods, ISSN: 2227-4588, ISBN: 978-1-61804-302-3,286-289.8. Zhang, X.,andY. Xu*(2015), A New Method of CDOM Absorption in ...
- 何剛(西南科技大學計算機科學與技術學院副教授)
Yu, Lang; Wu, Wenqing; Gang He*; Yu, Wenxin.Dynamic Variance Analysis of One-Dimensional Signal in Gaussian Noise Based on Recursive Formula.Advances in Intelligent systems and Interactive Applications - Proceedings of the 4th International Conference on Intelligent, Interactive systems and ...
- 李劍鋒(北京工業大學機電學院教授)
[9] Jianfeng Li, Shiping Zuo, Leiyu Zhang* Mingjie Dong, Chunjing Tao, and Run Ji. Mechanical design and performance analysis of a novel parallel robot for ankle rehabilitation. ASME Journal of Mechanisms and Robotics, 2020, 12(5), 051007: 1-17.[10] Li Jianfeng, Fan Wenpei, Dong...
- 龍旭(西北工業大學教授)
10.2022年度著名國際組織ScienceFather授予的最佳研究員獎（Best Researcher Award）, Global Awards on Artificial Intelligence and Robotics, AIR2022 11.2021年陝西省科技工作者創新創業大賽決賽二等獎，項目名稱：電子封裝材料力學性能壓痕儀，完成人：龍旭，劉永超，賈啟普，申子怡，盧昶衡，蘇昱太，常曉通 12.2021...
- 董潔(北京科技大學控制科學與工程系教授)
[5] Dong, Jie; Chen, Haitao; Liu, Sen. A Behavior-based Policy for Multirobot Formation Control[C]. Advances In Manufacturing Technology, PTS 1-4. 2012 [6] Dong, Jie;Jia, Xuemei; Zhang, Xu. Artificial neural network based control strategy research and simulation on robot uncalibrated ...
- 侯至丞
IET Control theory and Applications,Robotics and Computer-Integrated Manufacturing,Advances in Mechanical Engineering,控制工程 參與會議 Session chair of the 14th International Conference on Ubiquitous Robots and Ambient Intelligence (2017), Session Title: Control, Estimation, Medical Applications Session chair ...
- 李京山(清華大學工業工程系主任、機械工程學院副院長)
· S. Lee, L. Liu, R. Radwin and J. Li, ``Machine learning in manufacturing ergonomics: recent advances, challenges, and opportunities,'' IEEE Robotics and Automation Letters, vol. 6, no. 3, pp. 5745-5752, 2021.· W. Zhu, A. DeLonay, M. Smith, P. Carayon and J. Li, ``...
- 顧慶毅
Qingyi Gu, Naoki Nakamura, Tadayoshi Aoyama, Takeshi Takaki, Idaku Ishii, A full-pixel optical flow system using a GPU-based high-frame-rate vision, (AIR 2015) Advances in robotics Qingyi Gu, Tadayoshi Aoyama, Takeshi Takaki, Idaku Ishii, Ayumi Takemoto, Naoaki Sakamoto, Real-time LOC-...
