解清閣，北京科技大學鋼鐵共性技術協同創新中心副研究員。 2014年在比利時魯汶大學獲得工學博士學位。2016-2017年在美國橡樹嶺國家實驗室從事博士後課題研究。2018年在新加坡科技局高性能計算中心從事Scientist II, stage III職位。主要從事金屬材料的微觀組織和力學服役關聯行為的仿真和套用研究，以及金屬材料增材製造的數字孿生計畫等
基本介紹
- 中文名：解清閣
- 畢業院校：比利時魯汶大學
主要成就
1. Q. Xie, Z.Yan, D. Yu, K. An, X. Yan, S. Yin, B. Gillham, X. Wu, P. Yang, Z. Zhao, Y.Wang, Crystallographic orientation and spatially resolved damage forpolycrystalline deformation of a high manganese steel, Acta Materialia 226(2022) 117628.
2. Q.Xie, Z. Pei, J. Liang,D. Yu, Z. Zhao, P. Yang, R. Li, M. Eisenbach, K. An, Corrigendum to “Transitionfrom the twinning induced plasticity to the g-e transformation induced plasticity in a highmanganese steel” [Acta Materialia 161(2018)273-284], Acta Materialia218(2021) 117211.
3. Q.Xie, J.Lian, J. Sidor, F. Sun, X. Yan, C. Chen, T. Liu, W. Chen, P. Yang, K. An, Y.Wang, Crystallographic orientation and spatially resolved damage in adispersion hardened Al alloy, Acta Materialia193(2020) 138-150.
4. Q. Xie, Z.Pei, J.Liang, D.Yu, Z.Zhao,P.Yang, R.Li, M.Eisenbach, K.An, Transition from the twinning induced plasticityto the g-e phase transformation induced plasticity in a highmanganese steel, Acta Materialia161(2018) 273-284.
5. Xie, Q., Van Bael, A., Sidor, J.,Moerman, J., Van Houtte, P. A new cluster type model for the simulation oftextures of polycrystalline metals. ActaMaterialia, 69, 175-186(2014).
6. Q. Xie, Y. Chen, P. Yang, Y. D. Wang, K.An, In-situ neutron diffraction and theoretical investigation on thetension-compression load reverse effect in the TWIP steel, Scripta materialia, 150,168-172(2018).
7.Q.Xie, J.Liang, A.D. Stoica, R. Li, P. Yang,Z. Zhao, J. Wang, H. Lan, R. Li, K. An, In-situ neutron diffraction study onthe tension-compression fatigue behavior of a twinning induced plasticitysteel, Scripta Materialia, 137,83-87(2017).
8.R. Li, Q. Xie(co-first author), Y. D. Wang, W. Liu,M.Wang, G. Wu, X. Li, M. Zhang, Z. Lu, C. Geng, T. Zhu, Unraveling submicronmechanical heterogeneity by three-dimensional X-ray micro-diffraction. Proceedings of the National Academy of Sciences (PNAS) 115(2018)483-388.
9. Q. Xie, G. Song, S. Gorti, AlexandruStoica, B. Radhakrishnan, JeanBilheux, M. M. Kirka, R. Dehoff, Hassina Z Bilheux, Ke An, Applying neutrontransmission physics and 3D statistical full-field model to understand 2D Bragg-edgeimaging, Journal of Applied Physics 123, 074901 (2018).
10. Q.Xie, J. Lian, F. Sun, B. Gan, Y.D.Wang, The lattice strain ratio incharactering the grain-to-grain interaction effect and its specific insight onthe plastic deformation of polycrystalline materials in a tensile test, Journal of strain analysis for engineeringdesign, 53,353-363(2018).
11. Q. Xie, A. Van Bael, Y. An, J.Lian, J. J.Sidor,Effects of the isotropic and anisotropic hardening within each grain on theevolution of the flow stress, the r-value and the deformation texture oftensile tests for AA6016 sheet, MaterialsScience and Engineering A 172, 154-164(2018).
12. Q. Xie,S. Gorti, J.J. Sidor, Y.G.An, Y.D.Wang, J. Lian, H.Lan, K.An, grain orientationdependence of the residual lattice strain in a cold rolled interstitial-freesteel, Steel research international 89(2018) 1700408 (cover report).
13. Q.Xie,R.Li, Y.D.Wang, R.Su, J.Lian, Y.Ren, W.Zhang, X.Zhou, Y.Wang, The in-depthresidual strain heterogeneities due to an indentation and a laser shock peeningfor Ti-6Al-4V titanium alloy, Materialsscience and engineering A, 714 140-145(2018).
14. Q.Xie, P. Eyckens, H. Vegter,J. Moerman, A.Van Bael, P. Van Houtte, Polycrystal plasticity modelsbased on crystallographic and morphologic texture: Evaluation of predictions ofplastic anisotropy and deformation texture. Materials Science and Engineering A, 581, 66-72 (2013).
15. Yang, M. X., Yuan, F. P., Xie, Q. G., Wang, Y. D., Ma, E., andWu, X. L. Strain hardening in Fe-16Mn-10Al-0.86C-5Ni high specific strengthsteel, Acta Materialia, 2016(109)213-222.
16. Sidor, J., Petrov, R., Xie, Q., Van Houtte, P. and Kestens,L., Evaluation of crystallographic changes and plastic strain ratio in Alalloys, Materials Science and Technology,2017(33) 667-677.
17. Rohit Voothaluru, VikramBeedekar, Qingge Xie, Alexandru D.Stoica, R.Scott Hyde, Ke An, In-situ neutron diffraction and crystal plasticityfinite element modeling to study the kinematic stability of retained austenitein bearing steels, Materials science andengineering A 711(2018) 579-587.
18. T. Liu, Z. Wu, A. D. Stoica, Q. Xie, W. Wei, H. Bei, Y. Gao, K. An, Twinning-mediated WorkHardening and Texture Evolution in CrCoFeMnNi High Entropy Alloys at CryogenicTemperature, Materials and design, 2017(131)419-427.
19. Thijs, L., Montero Sistiaga,M., Wauthlé, R., Xie, Q., Kruth, J.,Van Humbeeck, J. (2013). Strong morphologicaland crystallographic texture and resulting yield strength anisotropy inSelective Laser Melted tantalum. Acta Materialia, 61 (12), 4657-4668.
20. P.Yang, Q. Xie, L. Meng, H. Ding, Z.Tang. Dependence of deformation twinning on grain orientation in a highmanganese steel. Scripta Materialia,2006, 55: 629–631.
21. L.Meng,P.Yang, Q.Xie, H. Ding, Z. Tang.Dependence of deformation twinning on grain orientation in compressed highmanganese steels. Scripta Materialia,2007, 56:931–934.
22. R.Li, Y. Wang, W.Liu, C.Geng, Q.Xie,D.Brown, K.An, Multiscale mechanical fatigue damage of stainless steelinvestigated by neutron diffraction and X-ray microdiffraction, ActaMaterialia 165(2019) 336-345.
23. S.Yin,M. Hassani, Q. Xie, R. Lupoi, Unravelling the deposition mechanism of brittleparticles in metal matrix composites fabricated via cold spray additivemanufacturing, Scripta Materialia, 194(2021)113614.
