《消防流量和流量泵壓力計算器》是一款IOS平台的套用。
基本介紹
- 軟體名稱：消防流量和流量泵壓力計算器
- 軟體平台：IOS
- 軟體大小：7.84MB
- 支持版本：iOS4.2.1及以上
套用介紹
這火套用計算兩個估計需要火流必須撲滅結構火災以及計算泵出口壓力為各種手線和主流在兩個標準和公制。 應用程式是由司機/運營商中會用到的應急回響或前期規劃套用的計算來幫助控制火災事件發生時,地面。 國家消防學院公式和愛荷華州立公式可以用來生成估計必要消防流量。這兩個方法給不同的總GPMs(LPMs),但是機會擊倒和抑制的努力有效增加當所需的火流計算和預先確定的。 泵出口壓力計算器估計泵面板排放壓力測量所需各種軟管配置在兩個Psi和kPa使用簡單的投入,如噴嘴類型、軟管直徑、軟管長度,設備摩擦損失和高程。這個公式是PDP = NP FL AFL 厄爾。 警告:此應用程式需要不負責它產生的結果。雖然計算已經徹底測試和引用,使用結果謹慎——理解的情況千差萬別,從情況情況。這些計算應該只是用作另一個工具的工具箱。 This fire application calculates both estimated needed fire flow required to extinguish a structure fire as well as calculate pump discharge pressures for various hand-lines and master streams in both standard and metric terms. The application is designed by driver / operators to be used during emergency response or pre-planning to apply calculations to help control the fire ground incident when it occurs. The National Fire Academy formula and the Iowa State formula can be used to generate the estimated necessary fire flow. These two methods give different total GPMs (LPMs), but the chances for effective knockdown and suppression efforts are increased when the needed fire flow is calculated and pre-determined. The pump discharge pressure calculator estimates the pump panel discharge pressure needed for various hose configurations measured in both Psi and kPa using simple inputs such as nozzle type, hose diameter, hose length, appliance friction loss and elevation. The formula used is PDP = NP FL AFL EL. WARNING: This app takes no responsibility for the results it produces. Although the calculations have been thoroughly tested and referenced, use the results with caution - understanding that circumstances vary from situation to situation. These calculations should simply be used as another tool in the toolbox.
