基本介紹
- 中文名：李毅波
- 學位/學歷：博士
- 職業：教師
- 專業方向：機械工程
- 任職院校：中南大學
個人經歷,研究方向,學術成果,榮譽獎項,
個人經歷
教育經歷
[1]2018.7-2019.7
帝國理工學院| Mechanics of materials 訪問學者
[2]2009.9-2013.5
中南大學| 機械工程| 博士學位| 博士研究生畢業
[3]2003.9-2006.2
中南大學| 機械製造及其自動化| 碩士學位| 研究生班畢業
[4]1999.9-2003.7
湘潭大學| 機械設計製造及其自動化| 學士學位| 大學本科畢業
工作經歷
[1]2020.9-至今
機電工程學院| 中南大學 教授
[1]2014.9-2020.9
機電工程學院| 中南大學 副教授
[2]2009.9-2014.9
機電工程學院| 中南大學 講師
[3]2006.2-2019.6
美國MSC軟體公司
研究方向
[1] 機械系統與製造工藝過程的數字孿生
[2] 輕質混雜材料-結構的設計製造一體化
[3] 機電液系統的多學科集成建模與分析
[4] 塑性加工工藝與裝備
學術成果
論文成果
[1] Li, Jian; Li, Yibo*; Huang, Minghui; Xiang, Yanhong; Bi, Rengui; Tu, Chuiqian; Wang, Bisheng. Surface Treatment for Improving Durability of Aluminum-Lithium Adhesive-Bonded Joints under Hot-Humid Exposure Coatings, 2019, 9(6): 1-16
[2] Li, Yibo; Li, Jian; Huang, Minghui; Xiang, Yanhong; Yang, Yuancheng. Effect of combined surface treatment on the adhesion performance of aluminium-lithium alloy Journal of Adhesion Science and Technology, 2019, 1-15
[3] Li, Yi-bo; Pan, Qing*; Huang, Ming-hui; Li, Lu. Set-based parametric modeling, buckling and ultimate strength estimation of stiffened ship structures Journal of Central South University, 2019, 26(7): 1958-1975
[4] Wang, Bisheng; Li, Yibo*; Liao, Yashi; Li, Jian. Calculation of Dynamic Stress Intensity Factors Based on XFEM Model [J]. China Mechanical Engineering, 2019, 30(11): 1294-1300
[5] Pan, Yang; Li, Yibo*; Liang, Dedong. The influence of dynamic swash plate vibration on outlet flow ripple in constant power variable-displacement piston pump [J]. Proc IMechE Part C: J Mechanical Engineering Sci., 2019, 0(0): 1-20
[6] Yashi Liao; Yibo Li*; Minghui Huang; Bisheng Wang; Yuancheng Yang; Shikai Pei. Effect of hole relative size and position on crack deflection angle of repaired structure [J]. Theoretical and Applied Fracture Mechanics, 2019, 101: 92-102
[7] Yashi Liao; Yibo Li*; Minghui Huang; Jian Li; Yang Pan. Residual Fatigue Life Analysis of Cracked Aluminum Lithium Alloy Plates Repaired with Titanium Alloy Patches for Different Sizes [J]. Journal of Failure Analysis and Prevention, 2019, 19(1): 258-269
[8] Chen, Ping-hu; Li, Yi-bo*; Li, Rui-qing; Jiang, Ri-peng; Zeng, Song-sheng. Microstructure, mechanical properties, and wear resistance of VCp-reinforced Fe-matrix composites treated by Q&P process [J]. INT J MIN MET MATER, 2018, 25(9): 1060-1069
[9] Li, Jian; Li, Yibo*; Huang, Minghui; Xiang, Yanhong; Liao, Yashi. Improvement of aluminum lithium alloy adhesion performance based on sandblasting techniques [J]. International Journal of Adhesion and Adhesives, 2018, 307–316
[10] Liao, Yashi; Li, Yibo*; Pan, Qing; Huang, Minghui; Zhou, Chuang. Residual fatigue life analysis and comparison of an aluminum lithium alloy structural repair for aviation applications [J]. Engineering Fracture Mechanics, 2018, 194: 262-280
[11] Ma, Jun; Li, Yibo*; Pan, Yang. Performance analysis and mathematical modeling of temperature field on piston/cylinder assembly Journal of Central South University (Science and T), 2018, 49(2): 330-338
[12] Pan, Qing; Li, Yibo*; Huang, Minghui. Control-oriented friction modeling of hydraulic actuators based on hysteretic nonlinearity of lubricant film [J]. Mechatronics, 2018, 53: 72-84
[13] Pan, Yang; Li, Yibo*; Chen, Anhua; Liang, Dedong. Numerical investigation of external radiation noise induced by dipole and quadrupole sources in an axial piston pump Noise Control Engineering Journal, 2018, 66(5): 401-414
[14] Pan, Yang; Li, Yibo*; Huang, Minghui; Liao, Yashi; Liang, Dedong. Noise source identification and transmission path optimisation for noise reduction of an axial piston pump [J]. Applied Acoustics, 2018, 130: 283-292
[15] Yuan, Shun; Li, Yi-bo*; Huang, Ming-hui; Li, Jian. Determination of key parameters of Al-Li alloy adhesively bonded joints using cohesive zone model [J]. Journal of Central South University, 2018, 25(9): 2049-2057
[16] Liu, Zhaowen; Li Yibo*; Huang Minghui; Wang Bisheng; Li Jian. The mechanism of strengthening shear strength of Al-Li alloy plates by anodizing Materials Reports, 2018, 32(9): 3181-3184，3207
[17] Ma Jun; Li Yibo*; Pan Yang. Performance analysis and mathematical modeling of temperature field on piston/cylinder assembly [J]. Journal of Central South University (Science and T), 2018, 49(2):
[18] Pan, Yang; Li, Yibo*; Ma, Pengda; Liang, Dedong. New approach of friction model and identification for hydraulic system based on MAPSO-NMDS optimization Elman neural network [J]. Advances in Mechanical Engineering, 2017, 9(12): 1-14
[19] Huang, Ming-Hui; Pan, Qing; Li, Yi-Bo; Ma, Peng-Da; Ma, Jun. Theoretical Investigation of the Viscous Damping Coefficient of Hydraulic Actuators Chinese Journal of Mechanical Engineering, 2017, 30(4): 829-842
[20] Pan Yang; Li Yibo*; Huang Minghui; Ma Jun; Liang Dedong. Valve plate improvement and flow ripple characteristic analysis for double compound axial piston pump T Chin Soc Agric Mach, 2016, 47(4): 1-9
[21] Lu, X. J; Li, Y. B; Huang, M. H.. Operation-Region-Decomposition-Based Singular Value Decomposition/Neural Network Modeling Method for Complex Hydraulic Press Machines [J]. Industrial & Engineering Chemistry Research, 2013, 52(48): 17221-17228
[22] Li Yi-bo; Zhang Meng; Huang Ming-hui; Lu Xin-jiang. Parameter indentification and compensation control of friction for die-forging press running at low speed [J]. Journal of South China University of Technology, 2013, 41(07): 38-44
[23] Li Yi-bo; Huang Ming-hui. Improvement in Speed Stability of Micro Space Motor with Temperature Compensation [J]. Journal of South China University of Technology, 2010, 38(06): 134-139
[24] Li, Xiaoqian; Li, Yibo. Thermo-mechanical coupling analysis of continuous cast rolling process using MARC software [J]. China Mechanical Engineering, 2006, 17(09): 915-918
科研項目
[1]國家自然科學基金面上項目---“選擇性增強鋁鋰合金航空整體壁板的止裂機理與損傷容限設計”
[2]國家科技支撐計畫課題---“工程機械減振降噪技術研究與套用”
[3]國家重大專項課題---“大型組合承載結構設計與高精度同步運行控制”
[4]柳州市重點研發計畫課題---“船舶用大規格耐腐蝕鋁合金板材開發”
[5]國家自然科學基金青年基金---“基於能量與物質流的巨型鍛件製造過程的信息流網路建模與控制”
著作成果
[1]MSC.MARC在材料加工工程中的套用
專利成果
[1]一種大直徑環件機械擴徑機
[2]工程機械液壓缸動態性能綜合測試平台
[3]工程機械液壓缸及導軌的摩擦特性測試裝置及測試方法
[4]大型模鍛液壓機混契約步平衡控制系統
[5]同步驅動模鍛液壓機超慢速液壓系統
榮譽獎項
[1]豪鵬國際獎勵基金優秀教師獎
[1]2017年度本科教學質量優秀獎
[2]第七屆湖南省大學生機械創新設計競賽：湖南省一等獎
[3]2014年全國大學生工程訓練綜合能力競賽：湖南省二等獎
