孔慶花

孔慶花

孔慶花,女,博士,北京交通大學高級實驗師。

基本介紹

  • 中文名:孔慶花
  • 學位/學歷:博士
  • 職業:教師
  • 專業方向:光電材料及其套用,套用電化學,化學工程
  • 就職院校:北京交通大學
個人經歷,主講課程,研究方向,

個人經歷

教育背景
1. 2011.09–2014.07, 中國科學院化學研究所,物理化學專業,理學博士
2. 2008.09–2011.07, 中國科學院蘭州化學物理研究所,材料學專業,工學碩士
3. 2004.09–2008.07, 聊城大學,材料化學專業,理學學士。
工作經歷
1.2014.07-2016.07,北京交通大學,博士後,合作導師:劉博教授
2.2016.07-至今, 北京交通大學,實驗師,高級實驗師

主講課程

主講《儀器分析實驗》和《現代材料測試分析方法實驗》課程。

研究方向

論文:
1. Qinghua Kong* , Xuanyun Wang*, Lishuang Xia, Chenbo Wu, Zhixin Feng, Min Wang, and Jing Zhao*,Achieving Low Contact Resistance by Engineering a Metal−Graphene Interface Simply with Optical Lithography,Applied Materials and Interfaces,2017,9.
2. Qinghua Kong*, Xi Wang, Aiwei Tang, Wubiao Duan, Bo Liu*,Three-dimensional hierarchical MoS2 nanosheet arrays/carbon cloth as flexible electrodes for high-performance hydrogen evolution reaction,Materials Letters,2016,177,139-142.
3. Qinghua Kong, Qing Liao*, Zhenzhen Xu, Xuedong Wang, Jiannian Yao and Hongbing Fu*, Epitaxial self-assembly of binary molecular components into branched nanowire heterostructures for photonic applications, Journal of the American Chemical Society, 2014.
4. Qinghua Kong, Li Ji, Hongxuan Li*, Xiaohong Liu, Yongjun Wang, Jianmin Chen, Huidi Zhou, Composition, microstructure, and properties of CrNx films deposited using medium frequency magnetron sputtering, Applied Surface Science, 2011.
5. Qinghua Kong, Li Ji, Hongxuan Li*, Xiaohong Liu, Yongjun Wang, Jianmin Chen, Huidi Zhou, Influence of substrate bias voltage on the microstructure and residual stress of CrN films deposited by medium frequency magnetron sputtering, Materials Science and Engineering B, 2011.
6. 孔慶花,吉利,李紅軒*,劉曉紅,陳建敏,周惠娣,濺射電流對磁控濺射CrNx薄膜結構與性能的影響,功能材料,2010,12(41)。
7. Dongxu Zhu,† Aiwei Tang,*,†,‡ Qinghua Kong,† Bin Zeng,† Chunhe Yang,† and Feng Teng*,‡,Roles of Sulfur Sources in the Formation of Alloyed Cu2−xSySe1−y Nanocrystals: Controllable Synthesis and Tuning of Plasmonic Resonance Absorption, The Journal of Physical Chemistry, 2017.
8. Xuedong Wang, Qing Liao, Qinghua Kong, Yi Zhang, Zhenzhen Xu, Xiaomei Lu, Hongbing Fu*, Whispering-Gallery-Mode Microlaser Based on Self-Assembled Organic Single-Crystalline Hexagonal Microdisks, Angewandte Chemie International Edition, 2014.
9. Hui Li, Yishi Wu, Xuedong Wang, Qinghua Kong, and Hongbing Fu*, A self-assembled ultrathin crystalline polymer film for high performance phototransistors, Chemical Communications, 2014.
10. Yongjun Wang, Hongxuan Li, Li Ji, Fei Zhao, Qinghua Kong, Yongxia Wang, Xiaohong Liu, Huidi Zhou, Jianmin Chen*, Microstructure, mechanical and tribological properties of graphite-like amorphous carbon films prepared by unbalanced magnetron sputtering, Surface & Coatings Technology, 2011.
11. Yongjun Wang, Hongxuan Li, Li Ji, Fei Zhao, Xiaohong Liu, Qinghua Kong, Yongxia Wang, Weilong Quan, Huidi Zhou and Jianmin Chen*, The effect of duty cycle on the microstructure and properties of graphite-like amorphous carbon films prepared by unbalanced magnetron sputtering, Journal of Physics D: Applied Physics, 2010.
12. F. Zhao, H.X. Li, L.Ji, Y.J. Wang, Y.F. Mo, W.L. Quan, Q.H. Kong, Y.X. Wang, J.M. Chen*, H.D. Zhou, Microstructure and mechanical properties of graphitic a-C:H:Si films, Surface & Coatings Technology, 2012.
13. 呂艷紅,孔慶花,吉利,李紅軒*,劉曉紅,陳建敏,周惠娣,氮氣流量對中頻非平衡反應磁控濺射製備 CrAlN 薄膜性能的影響,中國表面工程,2011。
科研項目:
基本科研業務費: 二硫化鉬三維納米複合結構的可控構築及其析氫性能研究, 2018-2020
國家自然科學基金"青年基金": 基於主客體化學的金屬單原子催化材料合成, 2018-2020
國家自然科學基金"青年基金": 有機三維分級納米結構的超分子自組裝及光電性質研究, 2017-2019
基本科研業務費: 基於超分子相互作用自組裝三維納米結構及微型化器件的構築, 2016-2017
基本科研業務費人才基金: 超細負極/多孔碳纖維複合材料的製備及其在鋰電池中的套用, 2016-2017
其它: 有機分級異質納米結構的可控自組裝及光電性能研究, 2015-2016
國家自然科學基金"青年基金": 基於EPR的聚乙烯基納米複合電介質電荷陷阱機制及陷阱特性的研究, 2016-2018

相關詞條

熱門詞條

聯絡我們