基本介紹
- 中文名：吳守軍
- 出生地：甘肅省靖遠縣
- 出生日期：1977年7月
- 畢業院校：西北工業大學
- 學位/學歷：博士
- 職業：教師
- 專業方向：材料學複合材料
- 任職院校：西北農林科技大學
人物經歷,學術兼職,研究方向,開設課程,學術論文,
人物經歷
2000年本科畢業於西安石油大學機械設計與製造及自動化專業，2004年碩士研究生畢業於西北工業大學材料學複合材料專業，2007年博士研究生畢業於西北工業大學材料學複合材料專業。2008年3月至2010年2月在以色列理工學院（Israel Institute of Technology-Technion）做博士後研究。
學術兼職
中國材料研究會會員。Surface and coating technology，International Journal of Applied Ceramic Technology，Materials Science & Engineering，Acta Astronautica等國際刊物審稿人。
研究方向
開設課程
開設本科生材料力學與工程力學教學。
學術論文
發表論文24篇，其中EI 刊物19篇，SCI刊物16篇（其中第一作者14篇）。
1.吳守軍，成來飛，張立同，徐永東，陳照峰. CVD SiC塗層3D C/SiC氧化行為的影響.無機材料學報. 2005, 20(1)：251-256.
2.吳守軍，成來飛，張立同，徐永東，沈季雄. 化學氣相沉積碳化矽塗層缺陷形成的機制及其控制. 矽酸鹽學報. 2005, 33(4)：443-446.
3.李舵，成來飛，吳守軍，沈季雄. 碳化矽塗層的離子注入改性. 矽酸鹽學報. 2005, 33(10):1202-1207
4.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu, Xingang Luan, Hui Mei. Corrosion of SiC/SiC composite in Na2SO4 vapor environments from 1000°С to 1500°С. Composite: Part A, 2006，37(9): 1396-1401
5.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu. Oxidation behavior of 2D C/SiC with a multi-layer CVD SiC coating. Surface and Coating Technology. 2006, 200 ( 14-15 ): 4489-4492.
6.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu. Thermal shock damage of a 3D-SiC/SiC composite. Advanced Engineering Materials. 2005, 7(11):1046-1049.
7.Shoujun Wu, Laifei Cheng, Qing Zhang, et al. Thermophysical and Mechanical Properties of a Three-Dimensional Hi–Nicalon/SiC Composite. International Journal of Applied Ceramic Technology. 2006, 3 (1)：75-79.
8.Shoujun Wu, Laifei Cheng, Litong Zhang, et al. Oxidation behavior of 3D Hi-Nicalon/SiC composite. Materials Letter. 2006, 60(25-26): 3197-3201
9.Shoujun Wu, Laifei Cheng, Litong Zhang, et al. Comparison of oxidation behaviors of 3D C/PyC/SiC and SiC/PyC/SiC composites in an O2-Ar Atmosphere. Materials Science & Engineering B. 2006，130 (1-3): 215-219.
10.Shoujun Wu, Laifei Cheng, Jun Zhang, Litong Zhang, et al. Tension-tension fatigue damage characteristics of a 3D SiC/SiC composite in H2O-O2-Ar environment at 1300ºC. Materials Science & Engineering A. 2006, 435-436: 412-417
11.Shoujun Wu, LaifeiCheng, Litong Zhang, et al. Wet oxidation behaviors of Hi-Nicalon fibers. Applied Surface Science. 2006,253: 1447-1450
12.Shoujun Wu, Laifei Cheng, Wenbin Yang, Yongsheng Liu, et al. Oxidation protective multilayer CVD SiC coatings modified by a graphitic B-C interlayer for 3D C/SiC composite. Applied Composite Materials. 2006, 13(6): 397-406
13.Shoujun Wu, Laifei Cheng, Ning Dong, Litong Zhang, Yongdong Xu. Flexural strength distribution of 3D SiC/SiC composite. Journal of Materials Engineering & Performance. 2006, 15 (6): 712-716
14.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu. Thermal shock behavior of a 3D−SiC/SiC composite. Metallurgical and Materials Transactions A. 2006, 37A: 3587-3592
15.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu. Effect of heat treatment on oxidation behavior of a 3D C/SiC composite with multi-layer CVD SiC coating (poster). The International Carbon Conference, 16-21 July, 2006, Aberdeen, Scotland
16.李舵，成來飛，吳守軍，張立同，徐永東，沈季雄. 碳化矽塗層的離子注入沉積改性. 材料導報, 2006, 20(7): 138-140.
17.Shoujun Wu, Laifei Cheng, Litong Zhang, Yongdong Xu. Residual strength prediction of SiC/SiC composite exposed to service environments with factor analysis method. International Journal of Applied Ceramic Technology. 2007, 4(3): 285-290
18.Liu, Y.S., Cheng, L.F., Zhang, L.T., Wu, S.J., et al. Oxidation protection of multilayer CVD SiC/B/SiC coatings for 3D C/SiC composite. Materials Science and Engineering. A, 2007, 466 (1-2), 172-177.
19.Xian Zhang, Laifei Cheng, Litong Zhang, Shoujun Wu, Yongdong Xu. Effect of yttria nanopowder on multi-layer coatings of ytrria and SiC/graphite. Key Engineering Materials. 2007, 334-335: 653-656
20.Laifei Cheng, Shoujun Wu, Litong Zhang, Yongdong Xu. Mechanical self-adaptability of a SiC/PyC/SiC composite during oxidation in air. Journal of Composite Materials. 2009,43(4): 305-313
21.Shoujun Wu, E.Y. Gutmanas and I. Gotman. Titanium nitride coatings on Ti alloys by PIRAC for orthopedic implants. Key Engineering Materials. 2010, 434-435: 481-484
