陸永浩

陸永浩，北京科技大學，研究員，博士生導師，國家材料服役安全科學中心(籌)建設項目指揮部副指揮，副總工程師。

基本介紹

• 中文名：陸永浩
• 外文名：Yonghao Lu
• 國籍：中國
• 民族：漢族
• 出生地：浙江象山 
• 出生日期：1967年6月 
• 畢業院校：北京航空航天大學
• 主要成就：國家材料服役安全科學中心(籌)建設項目指揮部副指揮
• 職稱：研究員

教育經歷

1989年, 江蘇大學，動力機械與工程系流體機械專業，學士畢業

1995年, 北京工業大學，基礎科學部固體力學專業，碩士畢業

1999年, 北京航空航天大學, 材料科學與工程系材料學專業，博士畢業

工作簡歷

1999/4 - 2001/4，北京科技大學，材料物理與化學系，博士後

2001/8 - 2002/11，日本東北大學, 斷裂與可靠性研究所，訪問學者

2002/12 -2005/4，香港城市大學，套用物理與材料系/機械與管理工程系，訪問學者

2005/5 – 2007/4，北京科技大學，材料物理與化學系，副教授

2007 - 2008，北京科技大學“重大工程材料服役安全研究評價設施”項目建設指揮部，副研究員

2009 - 2016，國家材料服役安全科學中心(籌)建設項目指揮部, 研究員，副總工程師，工程技術部主任

2016 - 今，國家材料服役安全科學中心(籌)建設項目指揮部, 研究員，副指揮，副總工程師，副總工藝師

研究興趣

1. 工程結構材料的腐蝕、應力腐蝕、腐蝕疲勞

2. 工程結構材料的高溫蠕變行為

3. 核電站關鍵材料、焊接連線件及服役安全評價

4. 工程關鍵材料微動磨損和微動腐蝕

5. 高溫水中的流動促進腐蝕

6. 新一代超（超）臨界火電站材料及服役評價

7. 核電、火電站裝備壽命預測及延壽技術

8. 工程材料失效微觀機理及數值模擬

代表性論文

1. Xinyu Wang, Zhenhua Li, Yakui Bai, Chen Sun, Ke Wang, Tingguang Liu, Yonghao Lu*, Tetsuo Shoji, Oxide properties of deformed Alloy 690TT in caustic solution at high temperature, Corrosion Science, 174 (2020) 108806. Impact Factor: 6.479

2. Ligong Ling, Peiliang Guo, ChenguangShang, Yonghao Lu*. Effects of oxides produced during welding on oxidation behavior of the 304L welded joint in simulated primary circuit solution of PWR. Corrosion Science, Volume 167, 1, 108515. Impact Factor: 6.479

3. Ligong Ling, Tingguang Liu, Yonghao Lu*, Peiliang Guo. Investigation of the oxides film on 304L base metal produced during welding process without inert gas shielding. Applied Surface Science, 2019, 465, pp. 780-786. Impact Factor: 6.182

4. Long Xin, Qian Huang, Yongming Han, Hongchao Ji, Yonghao Lu*, Tetsuo Shoji. Insights into the fatigue cracking of Alloy 690TT subjected to fretting wear under partial slip conditions. Materials Characterization, 2020, 159, 110040. Impact Factor: 3.562

5. Zhenhua Li, Yonghao Lu*, Xinyu Wang. Modeling of stress corrosion cracking growth rates for key structural materials of nuclear power plant. Journal of Materials Science, 2020, 55(2), 439-463. Impact Factor: 3.553

6. Long Xin, Xue Liang, Yongming Han, Yonghao Lu*, Tetsuo Shoji. Investigation into the fretting corrosion of alloy 690 TT against type 304 stainless steel in high temperature pure water under partial slip conditions. Tribology International, 2019, 134, pp. 93-101. Impact Factor: 4.271

7. Long Xin, Miao Ma, Yonghao Lu*, Tetsuo Shoji. Comparative study on fretting wear behaviors of Alloy 600MA in dry air and deionized water conditions. Wear, 2019, 418-419, pp. 167-179. Impact Factor: 4.108

8. Wei Wang, Tingguang Liu, Xinyuan Cao, Yonghao Lu*, Tetsuo Shoji. In-situ SEM study of crack initiation and propagation behavior in a dissimilar metal welded joint. Materials Science and Engineering A. 2018, 729, pp. 331-339. Impact Factor: 4.081

9. Xinyuan Cao, Ping Zhu, Tingguang Liu, Yonghao Lu*, Tetsuo Shoji. Thermal aging effects on mechanical and electrochemical properties of stainless steel weld overlay cladding. 2018. Surface and Coatings Technology. 344, pp. 111-120. Impact Factor: 3.192

10. Xinyuan Cao, Ping Zhu, Qing Yong, Yonghao Lu*, Tetsuo Shoji. An investigation on high temperature fatigue properties of tempered nuclear-grade deposited weld metals. Journal of Nuclear Materials, 2018, 499, pp. 317-325. Impact Factor: 2.547

11. Long Xin, Beibei Yang, Jie Li, Yonghao Lu*, Tetsuo Shoji. Microstructural characteristics of Alloy 690TT subjected to fretting corrosion in high temperature water. Corrosion Science, 2017, 123, pp. 116-128. Impact Factor: 5.352

12. Jie Li, Beibei Yang, Yonghao Lu*, Zihao Wang, Tetsuo Shoji. The effects of electrochemical polarization condition and applied potential on tribocorrosion behaviors of Inconel 690 alloys in water environment. Materials and Design, 2017, 119, pp. 93-103. Impact Factor: 4.525

13. Jie Li, Beibei Yang, Yonghao Lu*, Tetsuo Shoji. T. The degradation mechanism of Inconel 690TT induced by fretting wear in air. Tribology International, 2017, 116, pp. 147-154. Impact Factor: 3.547

14. Long Xin, Beibei Yang, Zihao Wang, Yonghao Lu*, Tetsuo Shoji. Microstructural evolution of subsurface on Inconel 690TT alloy subjected to fretting wear at elevated temperature, Materials & Design, 2016, 104, pp. 152-161. Impact Factor: 4.364

15. Zirui Chen, Yonghao Lu*. Xianfei Ding, Tetsuo Shoji. Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal, Materials Characterization, 2016, 121, pp 166-174. Impact Factor: 3.220

指導學生情況

1.指導博士研究生18人，其中留學生1人，已畢業6人；

2.指導碩士研究生28人，其中留學生1人，已畢業17人。